Search found 582 matches
- Sun Jan 15, 2023 7:14 pm
- Forum: Live Steam
- Topic: Steam pressure gauge question
- Replies: 12
- Views: 8350
Re: Steam pressure gauge question
To all, 100 % agree to comments! Bill, yes, there were issues now and then. I baught a medium size boiler which had an idnustry type 40 mm gauge with a range up to 10 bars. The boiler showed a steady 8 bars (120 psi) maximum preasure when fired up :twisted: After some (water) tests with a second one...
- Thu Jan 12, 2023 5:24 pm
- Forum: Live Steam Marketplace
- Topic: Low Water Alarms
- Replies: 7
- Views: 2094
Re: Low Water Alarms
Hello Jack, Thank you for posting and your offer! Superb models 8). Just a little too tall for my A 1239 :( The Nathan type seemed to be the more reliable one. It's function was by active force, no debris could stop it. Checking was easy, too. Locomotive Cyclopedia contains a drawing with explanatio...
- Sun Jan 08, 2023 8:10 pm
- Forum: Build Log
- Topic: My N&W class A 1239 (gauge 5", 1 in 10 scale)
- Replies: 236
- Views: 271428
Re: My N&W class A 1239 (gauge 5", 1 in 10 scale)
Hello Brian, Thank you for your recognition :) apm, March is a little too early to start the season, sorry :( Most clubs will start the outdoor season in late april or even may. Hamburg is very well conected to most of the bigger cities by high speed rails (ICE). So you might visit one of the bigger...
- Tue Dec 27, 2022 7:14 pm
- Forum: Live Steam
- Topic: draught required for oil firing
- Replies: 24
- Views: 4383
Re: draught required for oil firing
H.ey Andrew, About 40 years ago I built a German class 44 oilburner, scale 1 in 10 for 5 " gauge. Your questions are well known to me :) The solution I found worked well for me - just no smoke at varius power outputs and yet exessive steam production if needed :D . Maybe the photos can be of so...
- Tue Dec 20, 2022 5:25 am
- Forum: Build Log
- Topic: 1” USRA Light Mikado
- Replies: 40
- Views: 34504
Re: 1” USRA Light Mikado
8) Hello Anthony, like your precision work 8) Maybe you know there is one of the batch of post WW II class 1-4-1 Rs, delivered to France, still alive at Brugg / Switzerland? Last summer I enjoyed a special round trip at Lake Zuerich. In excellent condition she`s still working as intended by their bu...
- Tue Dec 20, 2022 4:59 am
- Forum: Live Steam
- Topic: Update On My PRR K-4 Project
- Replies: 10
- Views: 4742
Re: Update On My PRR K-4 Project
Hello eptfan,
Congratulations to your almost finished K4s! Looking superb and performing as well, she`s is all one could wish . Hats off!
Have some fun with your engine for some years to come!
Best regards
Asteamhead
Congratulations to your almost finished K4s! Looking superb and performing as well, she`s is all one could wish . Hats off!
Have some fun with your engine for some years to come!
Best regards
Asteamhead
- Mon Nov 14, 2022 6:26 pm
- Forum: Live Steam
- Topic: Injector Problem
- Replies: 6
- Views: 1959
Re: Injector Problem
Hello Anthony,
Thank you for your precise explanation how this tiny part works
All the best by
Asteamhead
Thank you for your precise explanation how this tiny part works
All the best by
Asteamhead
- Thu Oct 20, 2022 6:02 pm
- Forum: Build Log
- Topic: 3/4" Scale J1e
- Replies: 1179
- Views: 496862
Re: 3/4" Scale J1e
Just cool
asteamhead
asteamhead
- Fri Oct 14, 2022 11:29 am
- Forum: Build Log
- Topic: Northern 4-8-4 Build 3/4”
- Replies: 276
- Views: 66669
Re: Northern 4-8-4 Build 3/4”
Hello
RussN, I am happy to see a quite similar solution of the same parts
Bushav, the simple plain valves will surely do for a while, too. Good luck!
Best regards
asteamhead
RussN, I am happy to see a quite similar solution of the same parts
Bushav, the simple plain valves will surely do for a while, too. Good luck!
Best regards
asteamhead
- Thu Oct 13, 2022 3:17 pm
- Forum: Build Log
- Topic: Northern 4-8-4 Build 3/4”
- Replies: 276
- Views: 66669
Re: Northern 4-8-4 Build 3/4”
Hello bushav, A gap of 1 to 2 (max) thou of an inch should work. With my first engine I started with piston valves of 16 - 0.03 mm diameter with no rings, made of stainless steel. They worked fine for years, as long as lubrication worked totally :!: reliable. The stem must not connected to the valve...
- Mon Oct 10, 2022 12:02 pm
- Forum: Build Log
- Topic: 2-1/2" NG class A shay.
- Replies: 281
- Views: 246027
Re: 2-1/2" NG class A shay.
Yes indeed! Nice jewelry
Carry on, please!
Asteamhead
Carry on, please!
Asteamhead
- Mon Oct 10, 2022 11:56 am
- Forum: Live Steam
- Topic: New PRR T1 Being Built
- Replies: 14
- Views: 4848
Re: New PRR T1 Being Built
Exactly my question. Does anyone want 1,000,000 of loco and tender out on the tracks? Am sure they have thought of this. As for anti-slip, all they need are encoders on the drive axles and a separate servo controlled throttle for the front cylinders. Trivial in today's environment...pretty much sta...