Search found 102 matches
- Thu Mar 13, 2014 3:15 pm
- Forum: Gunsmithing
- Topic: Barrel Liner install?
- Replies: 11
- Views: 14135
Re: Barrel Liner install?
All we ever used was the Loctite , never had any problems .
- Tue Aug 27, 2013 8:27 pm
- Forum: Gunsmithing
- Topic: Case Neck Tuning Device
- Replies: 17
- Views: 15237
Re: Case Neck Tuning Device
Poking through the posts . Ordinarily I don't give up loading secrets but just this once . Turn the necks with the case neck seated on a mandrel in a lathe . Let the case and mandrel rotate as one . More uniform than rotating the mandrel inside of the neck while cutting . ( I shoot a 6.5 wssm , the ...
- Fri Aug 09, 2013 5:02 am
- Forum: Lathes
- Topic: Atlas Lathe Gears
- Replies: 10
- Views: 6425
Re: Atlas Lathe Gears
Dean , Do you have the gear chart (metal plackard) ?
Do you know if you have all the gears ?
I changed mine over to a gear box and have all the change gears if you need any .
Steve S
Do you know if you have all the gears ?
I changed mine over to a gear box and have all the change gears if you need any .
Steve S
- Sat Apr 13, 2013 9:48 am
- Forum: Gunsmithing
- Topic: 6.5-284 winchester? norma? lapua?
- Replies: 6
- Views: 7163
Re: 6.5-284 winchester? norma? lapua?
After your chamber is done , I'd recommend a kerosafe casting so you can measure exactly what you have . Then you'll know the dimensions your brass will require .
- Fri Apr 01, 2011 3:17 pm
- Forum: General Discussion
- Topic: Hello from a new member
- Replies: 15
- Views: 5145
Re: Hello from a new member
Hello Gunney ,
Welcome to the group , anytime you want to talk astronomy let me know . I'm an astro-nut , you might even say a lunar-tick . My current flagship is an 18" NGT/JMI .
Clear Skies ,
Steve S
Welcome to the group , anytime you want to talk astronomy let me know . I'm an astro-nut , you might even say a lunar-tick . My current flagship is an 18" NGT/JMI .
Clear Skies ,
Steve S
- Fri Apr 01, 2011 2:59 pm
- Forum: General Discussion
- Topic: cold air gun--shop made or other
- Replies: 16
- Views: 7909
Re: cold air gun--shop made or other
P.M. - Sent .
Steve
Steve
- Thu Mar 31, 2011 5:52 pm
- Forum: General Discussion
- Topic: cold air gun--shop made or other
- Replies: 16
- Views: 7909
Re: cold air gun--shop made or other
I'll take some pics . Price : just pay the shipping .
Steve
Steve
- Wed Mar 30, 2011 4:59 pm
- Forum: General Discussion
- Topic: cold air gun--shop made or other
- Replies: 16
- Views: 7909
Re: cold air gun--shop made or other
Hi , I just remembered I have one . Haven't used it in years . I'm more surprised that I remembered where I put it ... I plugged it in , still works . Are you looking for one . I used it for hyper-cooling film for astrophotography . Not one of my better ideas ...
Steve
Steve
- Tue Mar 29, 2011 5:44 pm
- Forum: Gunsmithing
- Topic: Show a rifle I built from scratch
- Replies: 69
- Views: 65210
Re: Show a rifle I built from scratch
Just curious , did you do the color case hardening on those receivers ?
Steve S
Steve S
- Wed Jan 26, 2011 9:20 pm
- Forum: Gunsmithing
- Topic: Ruger 10-22 bolt jeweling
- Replies: 13
- Views: 17208
Re: Ruger 10-22 bolt jeweling
I would imagine the dowel rods may work on the 10-22 bolt because of the flat side of the bolt . Are both side to be jewelled ? The swirls also help to hold oil on the bolt . Are you going to polish the bolt before jeweling ? I use the wire brush method , wrapping wire around the brush end to get ni...
- Thu Jan 13, 2011 7:41 pm
- Forum: General Discussion
- Topic: MACHINE TOOL SAFETY
- Replies: 22
- Views: 4758
Re: MACHINE TOOL SAFETY
A lapse in good judgement , well : I lost the entire fingernail , tip , broke the bone . I am so lucky !!!!! I attached the nail to my desk's wallboard in plain view to always remind myself . Like I tell my kids : "Things are only fine until they are not , And it changes twice as fast " St...
- Wed Jan 12, 2011 5:15 pm
- Forum: General Discussion
- Topic: cabin fever expo , York Pa
- Replies: 7
- Views: 2800
Re: cabin fever expo , York Pa
I looked through the pics , that was enough to spark my interest . If family obligations allow , I'll be there . I would love to make a radial five cylinder motor for one of my rc planes ....
Steve S
Steve S