The Home Machinist!

Using a small printer isn't too bad. This was done with four pieces glued together to make one pattern netting a pattern more than twice the size of the printer bed. There was of course a cope side and then a drag side. The original drawing was of one half only...printed, then a mirror was printed.....

If I remember right...
PALMETTO... GRAFOIL.
is the brand names we used on valve stems. I don't have time to search right now, but you might try GIGGLE them.
Scotty

Is the narrower driver on the wider guage to help prevent having to move side rods, valve gear or perhaps cylinder outboard? Or in other words having a narrower driver causes the flanges to be further apart by default.
Scotty

Don't know if this is what you meant, but here is some of our mess. You can see our lifting tongs to the left in the first picture, and to the right in the fifth. We intentionaly require two folks to lift and pour. It is difficult to see but the ground slopes away, with two folks on the hot tools, i...

Original drwgs #2,3 & 4 by Bill Laird, 12-21-2001 Drwg # 1 is a clarification of what we used at one time at Alaska Live Steamers, Bob Englebach. If you want or need clarification on any item in any photo, let me know. I can also email digitized copies to anyone if you PM you e-mail. Sry they ar...

Andy:
Spoke w/ your friend about ten wheeler castings, bagley burner and truck frames.
Sent you a PM. Thank you very much.
Scotty

Anybody get "Railroadsupply.com" to work? Or, is there a different site url for them?
Thx Scotty

Andy: Thanks for not being swayed by the wise guys and those who can't read. You will be doing your friend and me a service. I have one unmachined Allen Ten Wheeler Casting I will sell for 1/2 of current new cost. If you or he are interested, please PM me. I have some other Ten Wheeler stuff if he h...

PM sent.
BTW, I had some communication with Dave Bortz, whom I think now has Superscale, but it didn't turn up anything.
Scotty

No, the problem we are having is I left the parts in the vinegar too long. I ordered two cups from Superscale and that seemed to help, but I should have ordered two stems at the same time and I didn't. But, now that you mention it, I am suspicious. It dosen't seem like the flow overboard with the st...

I've been allowed to take my friends Mogul out many times, and have had to push her back in twice, because I have caused his superscale injector to become erratic and I can't get repair parts for it. Were it not for the axle pump, I would never have gotten out the chute. The tender hand pump.... onl...

IMHO