Too hard for a saw for sure, but an angle grinder will make short work of making it short.
If that's what you want.
Search found 1981 matches
- Fri Jan 19, 2024 5:20 am
- Forum: Lathes
- Topic: tail stock arbor
- Replies: 2
- Views: 530
- Fri Jan 19, 2024 5:17 am
- Forum: Lathes
- Topic: Manually machining a piston ovality
- Replies: 20
- Views: 1393
Re: Manually machining a piston ovality
I suppose it's not too difficult with a CNC machine; but how was it done before, back in the manual only days? a 4-jaw eccentric setup will not produce a true oval. Even on a mill, it would be devilishly difficult. I suppose some sort of crank system on the spindle could move the tool in and out, bu...
- Sun Jan 14, 2024 6:08 pm
- Forum: The Junk Drawer
- Topic: Must be bad weather ouitside
- Replies: 15
- Views: 38283
Re: Must be bad weather ouitside
Terrible weather here; still no rain!
The whole area may be a desert soon.
The whole area may be a desert soon.
- Sun Jan 14, 2024 7:19 am
- Forum: Milling Machines
- Topic: Fixing the electrics in my old German mill Ruhla 250/710
- Replies: 89
- Views: 580998
Re: Fixing the electrics in my old German mill Ruhla 250/710
Went to use the mill yesterday, and the table went down instead of up. Fortunately it has a clutch on the feed because it was already bottomed. Then I saw the other axises were also running backwards; what sort of diabolical error was happening now? Then I realized the spindle was reversed too. Then...
- Sat Jan 13, 2024 10:08 am
- Forum: General Discussion
- Topic: Hot glue gun
- Replies: 15
- Views: 89347
Re: Hot glue gun
Different glue sticks are available... I've used it successfully outdoors in full rain and sun, but not on anything with much stress on it. I used black, which usually has better UV resistance. It wasn't particularly high end material though. In a dry interior environment, I haven't noticed any degr...
- Sat Jan 13, 2024 3:22 am
- Forum: General Discussion
- Topic: Hot glue gun
- Replies: 15
- Views: 89347
Re: Hot glue gun
I have several and I find it a very useful material. I have 3, one each for white black and clear glue. Strength is moderate, it depends on the surface as well as the fit. The hot glue fills gaps well, but when used that way it's not very strong. It is strong in thin films on porous surfaces if it w...
- Thu Jan 11, 2024 12:51 pm
- Forum: Lathes
- Topic: Tailstock Position Accuracy?
- Replies: 7
- Views: 71211
Re: Tailstock Position Accuracy?
That's more accurate than my tailstock for sure; I gave up when I figured out that the bed has more wear than the error I was trying to correct. 2 shafts I cut 31mm (1-1/4") in diameter and 30cm (12") long, mounted between centers, are both equally 0.15mm (0.006") thicker at the cente...
- Mon Jan 08, 2024 6:29 pm
- Forum: Welding
- Topic: ANOTHER reason NOT to weld cast iron
- Replies: 22
- Views: 171055
Re: ANOTHER reason NOT to weld cast iron
I cut and sectioned a cast iron exhaust manifold, then welded the resulting 7 pieces back together with cast iron welding rod. This was 30 years ago, and I don't know what the rod was composed of exactly, but it was not nickel. I tacked the parts together with the flanges bolted to the head, then re...
- Sun Jan 07, 2024 5:41 pm
- Forum: Milling Machines
- Topic: Fixing the electrics in my old German mill Ruhla 250/710
- Replies: 89
- Views: 580998
Re: Fixing the electrics in my old German mill Ruhla 250/710
I have a wiring diagram and some other things I got from other owners. I'll send them to you if you give me an email address. I used photoshop to join up 8 different images into one large document. My experience is that the original relays are just too old, and they almost all have a bad contact or ...
- Sat Jan 06, 2024 12:46 pm
- Forum: General Discussion
- Topic: Dealing with Rusty steel
- Replies: 11
- Views: 98926
Re: Dealing with Rusty steel
This is a DIY job I did some years ago; I cut away 8 tons of old steel and bought 12 tons of new steel for the job. Around 1000 yards of weld. 2 water tanks and 2 fuel tanks are in there that I made too, around 450 gallons each. I did not grind down to bare metal for any of it. No one I've ever work...
- Thu Jan 04, 2024 12:32 pm
- Forum: General Discussion
- Topic: Dealing with Rusty steel
- Replies: 11
- Views: 98926
Re: Dealing with Rusty steel
You can't weld through mill scale??
Good thing I never knew that.
Good thing I never knew that.
- Sun Dec 31, 2023 6:48 am
- Forum: General Discussion
- Topic: Dealing with Rusty steel
- Replies: 11
- Views: 98926
Re: Dealing with Rusty steel
Welding shouldn't be a problem. There might be inclusions that would fail an x-ray exam like they use for oil pipelines, but for a simple structure it will be fine. If you've removed surface rust and rust scale (black/grey will come off with a hammer and leave a crater or pit), you can paint with an...