The Home Machinist!

Good Morning BigMog

Have you contacted Paul at RMI. They can tell you how they set theres

But here is my 2cents, knowing how the systems works
you would need to have a very close clearance
Just to the point of dragging on the wheel face

Chris

I normally test both of my safeties and my injectors before i leave the steaming bays

Unka(I wish this gauge business had got sorted out way back in the beginning so we could run anywhere in the US of A [img]/ubb/images/graemlins/crazy.gif"%20alt="[/img])Jesse You know unka Jesse, With a heavy enough engine we will not that big of a problem running on the "narrow gaug...

Willy, I did try and tap the safety and the stupid thing would still pop open, scared a few people as I was running with the poker pressed on the safety to keep it shut. Fred R. attached is a photo of my safetes on the loco. They are the Bagley type I think. I ordered one of them from coles a while...

As i understand They were charged with super heated water the water went to steam as pressure dropped from use maybe some of the old timers can second that of tell me i have it all wrong [img]/ubb/images/graemlins/confused.gif"%20alt="[/img] [img]/ubb/images/graemlins/grin.gif"%20alt=...

here you go
RAILROAD WAREHOUSE

Oh, Heck, in that case, I have one
an early MDC model
Cheers
Chris

Hi everyone,

On a single axle equalized lead truck,
Where does the “rocker arm” tie into the lead truck assembly?
I figured it would tie into journal boxes, to apply weight to that axle
but this doesn’t not seem to be the case.
Thanks for the input

Good morning Mike,
I know this was for a 1.5 scale bell. but by chance, do you have or know where one can get a 2.5 scale bell?
Thanks
Chris

Thats interesting,
If i understand you correctly, that shell must be a custom roll.
im will be using 12 sch 40 pipe as my shell with will be 12 " id
im not going to have that much lagging, but i will have at least a half inch
does you boiler have the "Water Walls"?
Chris

What is the diameter of your lokies boiler?
If i remember correctly it is only 10 inches

check with RMI
Roll Models