1911 Project

Topical Discussions include anything pertaining to Gunsmithing.

Moderators: Harold_V, JackF, GeorgeGaskill

User avatar
GlennW
Posts: 6824
Joined: Sun Apr 15, 2007 9:23 am
Location: Florida

Re: 1911 Project

Post by GlennW » Mon Mar 09, 2020 5:28 pm

Got the upper lugs and barrel fitting in the slide the way I want them to, so I slid it onto the frame and tried a few gauge pins in the slide stop bore until it locked up tight. Looks like a 175” pin is it, so now I have a pretty good idea of what needs to be removed (right around .025") from the lower lugs to fit a .200” Slide Stop.
Image

Apparently, I neglected to order a Slide Stop, so I’ll get fitting it once I have one here.
Glenn

Operating machines is perfectly safe......until you forget how dangerous it really is!

Post Reply