cutting new slot in weaver mount
Posted: Tue May 05, 2015 2:29 pm
Hey all
Newbie here,
I have a Hatsan air gun, The welded weaver mount is missing a slot closest to the rear of the receiver
I would like to mill an extra slot. The process appears to be rather straight forward.
I have never mounted a barrel into a vice before, Air Gun barrels have the air chamber and receiver
behind the barrel.
Would a v-block be the best way to mount the receiver or would there be a better way to do so.
Thanks
Joe
Newbie here,
I have a Hatsan air gun, The welded weaver mount is missing a slot closest to the rear of the receiver
I would like to mill an extra slot. The process appears to be rather straight forward.
I have never mounted a barrel into a vice before, Air Gun barrels have the air chamber and receiver
behind the barrel.
Would a v-block be the best way to mount the receiver or would there be a better way to do so.
Thanks
Joe