The Home Machinist!

the sear bar for a complete system. But I always hate to sell gun stuff I bought for myself. In my 56 years, I have sold only two guns I originally bought for myself and I would just as soon still have both.

George, I can make it if I can get a print. Thanks so much for your help. Butch

I'll send you both parts and the action pins and springs and you can see if they fit, and if they do, use them as patterns for new ones and then send the old ones back to me.

George, you are too kind. I have a friend that is a design engineer and he will solid model it for me and draw a print. I should say recently retired. I also have an aquaintence with a wire edm that would help me. I would like to return the favor someway. Would you like a good black walnut slab for a stock? My address is The Barrel Man 10099 FM 1565 Poetry, Texas 75160. My phone#'s are on my website. Regards Butch

By the way, I did not include the bolt stop (haven't pulled it from the action yet.) It seems to be a simpler shape so I will see about making a drawing for it.

George, I'm sorry for not getting back to you. After buying all this old ammo, brass, bullets, and reloading equip., has me overwhelmed. I will look for the package. Thanks again. Thebarrelman

I have found most of the pieces in all this mess that I bought. Butch

Butch,

What do you need to put your rifle together?

OR: do you want to sell what you have?

You likely understand that this thread originated back in 2003. The OP has not made a showing on the board for years, so you most likely will not receive a response from him.

H