Wood Shaper Cabinet = Welding Table?

Welding Techniques, Theory, Machines and Questions.

Moderators: Harold_V, Scott

Post Reply
User avatar
SteveHGraham
Posts: 7787
Joined: Sat Jan 17, 2009 7:55 pm
Location: Florida

Wood Shaper Cabinet = Welding Table?

Post by SteveHGraham » Wed Oct 23, 2019 11:28 am

Someone near me is selling a Powermatic shaper cabinet with no motor or spindle. Cost: $100.

This is a big machine like a table saw. Has a 30" by 40" cast iron top with slots.

Naturally, I am thinking of turning it into a welding table. It's flat, it has at least one T-slot, it may have casters, and cast iron doesn't stick to weld spatter.

Thoughts?
Every hard-fried egg began life sunny-side up.

User avatar
liveaboard
Posts: 882
Joined: Sun Dec 08, 2013 1:40 pm
Location: southern Portugal
Contact:

Re: Wood Shaper Cabinet = Welding Table?

Post by liveaboard » Wed Oct 23, 2019 12:44 pm

offer $60

User avatar
BadDog
Posts: 4802
Joined: Wed May 17, 2006 8:21 pm
Location: Phoenix, AZ

Re: Wood Shaper Cabinet = Welding Table?

Post by BadDog » Wed Oct 23, 2019 3:44 pm

+1
Russ
Master Floor Sweeper

RMinMN
Posts: 78
Joined: Tue Jan 02, 2018 8:50 am

Re: Wood Shaper Cabinet = Welding Table?

Post by RMinMN » Fri Oct 25, 2019 5:28 am

I think it would be nearly impossible to fit my tractor and plow up on that cabinet to do repairs. My cultivator might be hard to get through the door to get there and when the grain drill breaks at the far end of the field I don't think moving that cabinet to it will help. Otherwise I like the idea of welding up where I don't have to be on my knees or laying on my back.

Post Reply