Welding Techniques, Theory, Machines and Questions.
Moderators: Harold_V, Scott
- Posts: 20
- Joined: Wed Mar 17, 2021 11:28 am
Yes, any technical vapors are harmful and it is best to work in a respirator if you do not work outdoors. In the room, a respirator is required, and until you ventilate the room, it is better not to take off the respirator.
- Posts: 1481
- Joined: Sun Dec 08, 2013 1:40 pm
- Location: southern Portugal
heislerboy wrote: ↑
Fri Mar 19, 2021 3:57 pm
you can't use stick welding in a typhoon, the max wind speed to weld in is 5 miles per hour this is from AWS (American Weld Society)
Welding in light wind works fine in practice, certainly more than 5mph.
However, when the wind gets really strong it will blow the ark right off the work.
I got no certification, but I did a lot of welding (a kilometer) out in the weather.
- Posts: 1837
- Joined: Wed Mar 15, 2006 11:10 pm
- Location: Farmington, NM
Exterior welders use shields or shelters for wind protection. It does not take much wind, just a breeze, to cause unacceptable defects in stick welds. The x-ray man will tell you, and repairs are expensive.