Omnicut 375-P

Welding Techniques, Theory, Machines and Questions.

Moderators: Harold_V, Scott

Post Reply
multis6
Posts: 2
Joined: Sun Jul 15, 2018 5:50 am

Omnicut 375-P

Post by multis6 » Sun Jul 15, 2018 10:44 am

Omnicut 375-P by Nu-tecsys.
I just picked up plasma cutter that is not working at this time. It’s a US built machine that is in good shape, clean etc. but is not operational except for the fan and power contactor. Doing research on line I find no info on the unit. Dose any one on this forum have the schematics to the circuit board and or general wiring for this machine? Thanks
Multis6

JackF
Posts: 1558
Joined: Mon Jan 26, 2009 3:56 pm
Location: Caldwell, Idaho

Re: Omnicut 375-P

Post by JackF » Sun Jul 15, 2018 11:27 am

Try a search on this board for Plasma cutter - Electrical repair by EdMc posted on Feb 2003. Some info there.


Jack

multis6
Posts: 2
Joined: Sun Jul 15, 2018 5:50 am

Re: Omnicut 375-P

Post by multis6 » Mon Jul 16, 2018 3:19 pm

Thanks for the response. Have seen the thread, Looking for more info. thanks

Post Reply