Quick Reply?

Get community help here, post test messages, suggestions etc. I will also document here changes that take place such as maintenance and upgrades.

Moderators: Harold_V, Marty_Escarcega

Post Reply
User avatar
ctwo
Posts: 2996
Joined: Tue Mar 27, 2012 12:37 pm
Location: Silly Cone Valley

Quick Reply?

Post by ctwo »

I saw on the bottom of this thread, both pages, there is a text box for quick reply.

http://www.chaski.org/homemachinist/vie ... 45&t=98849

I do not see this in other threads, so I was curious if it is intentional...?
Standards are so important that everyone must have their own...
To measure is to know - Lord Kelvin
Disclaimer: I'm just a guy with a few machines...
redneckalbertan
Posts: 1274
Joined: Thu Nov 01, 2012 10:39 am
Location: South Central Alberta

Re: Quick Reply?

Post by redneckalbertan »

I've noticed that as well and wondered why some have it and others don't.
User avatar
Harold_V
Posts: 20231
Joined: Fri Dec 20, 2002 11:02 pm
Location: Onalaska, WA USA

Re: Quick Reply?

Post by Harold_V »

I don't know that I can answer that one. I was aware that one of them was a feature made available when the sub-forum was added. That tells me that it's a feature that can be chosen. As I try to not make those decisions, deferring to the owner or the board administrator, I have not researched the possibility. Perhaps one of them can address the question.

Harold
Wise people talk because they have something to say. Fools talk because they have to say something.
Marty_Escarcega
Site Admin
Posts: 1730
Joined: Wed Dec 18, 2002 8:17 pm
Location: Mesa, AZ USA

Re: Quick Reply?

Post by Marty_Escarcega »

Quick Reply has been added to most all of the forums. Thanks for pointing it out.
Marty
"Jack of all Trades, Master of None"
User avatar
ctwo
Posts: 2996
Joined: Tue Mar 27, 2012 12:37 pm
Location: Silly Cone Valley

Re: Quick Reply?

Post by ctwo »

They are so inviting... :D
Standards are so important that everyone must have their own...
To measure is to know - Lord Kelvin
Disclaimer: I'm just a guy with a few machines...
Post Reply