End Mills-boring bars

Buying, selling, trading and for giving away Items of interest to the Home Machinist Community. (Non-Commercial Only) *PLEASE BE SURE TO LIST CONTACT INFORMATION AND LOCATION OF ITEM*

Moderator: Harold_V

Post Reply
John Evans
Posts: 1807
Joined: Tue Jan 20, 2009 9:33 pm
Location: Phoenix ,AZ

End Mills-boring bars

Post by John Evans » Thu Dec 28, 2017 6:40 pm

As usual bought a whole bunch of stuff to get a few items.
First off 70 HSS endmills all seem to be usuable at worst most seem nice and sharp. 1/8 to 1" shanks no bigger than 3/4" $65 shipped .
Second a bunch of boring bars and a few grooving tools ,smallest about 1/8 some HSS some carbide .Some need sharping some OK as is. $15 shipped These are last 2 pictures. Price covers me a cheap lunch and postage ! :roll:
Please show your interest here and Paypal preferred.
Attachments
12-28 001.JPG
12-28 002.JPG
12-28 003.JPG
12-28 004.JPG
boring bars
12-28 005.JPG
boring bars
www.chaski.com

John Hasler
Posts: 414
Joined: Tue Dec 06, 2016 4:05 pm
Location: Elmwood, Wisconsin

Re: End Mills-boring bars

Post by John Hasler » Thu Dec 28, 2017 7:40 pm

I'd take everything but I don't do PayPal.

John Evans
Posts: 1807
Joined: Tue Jan 20, 2009 9:33 pm
Location: Phoenix ,AZ

Re: End Mills-boring bars

Post by John Evans » Thu Dec 28, 2017 8:05 pm

John Hasler wrote:I'd take everything but I don't do PayPal.
PM inbound John
THKS John
www.chaski.com

stephenc
Posts: 210
Joined: Sat Jul 05, 2014 6:13 pm
Location: youngstown ohio

Re: End Mills-boring bars

Post by stephenc » Thu Dec 28, 2017 9:31 pm

Seconds ... just in case

John Hasler
Posts: 414
Joined: Tue Dec 06, 2016 4:05 pm
Location: Elmwood, Wisconsin

Re: End Mills-boring bars

Post by John Hasler » Sat Jan 06, 2018 1:12 pm

Package arrived in fne shape. Now instead of "How can I make a boring bar to do that job" It'll be "Which boring bar shall I use to do that job". I'll also need to figure out storage and organization for my endmlls so that I can pick out the exact one I need instead of figuring out how to make do with one of few I had.

Thanks.

Post Reply