Wanted D1-4 Backing Plate

Buying, selling, trading and for giving away Items of interest to the Home Machinist Community. (Non-Commercial Only) *PLEASE BE SURE TO LIST CONTACT INFORMATION AND LOCATION OF ITEM*

Moderator: Harold_V

Stob
Posts: 7
Joined: Mon Oct 05, 2015 5:46 am

Wanted D1-4 Backing Plate

Post by Stob » Tue Oct 30, 2018 6:55 am

Looking for a 6" D1-4 plain back. It needs to be thick enough I can drill 4- 3/8" holes from edge to center hole, at 12, 3, 6 and 9 o'clock. Existing mounting holes wouldn't bother me.

Lazz
Posts: 134
Joined: Sun Jul 29, 2012 11:06 pm
Location: The Warm Arizona Deserts... Phoenix to be precise...

Re: Wanted D1-4 Backing Plate

Post by Lazz » Thu Nov 08, 2018 7:20 am

I have a 10" D1-4 if that helps...
How about $65 shipped
https://imgur.com/a/pEUv2Dr

Stob
Posts: 7
Joined: Mon Oct 05, 2015 5:46 am

Re: Wanted D1-4 Backing Plate

Post by Stob » Thu Nov 08, 2018 7:27 am

Thanks for the reply. What you pictured looks to be a faceplate, not a backing plate. I have a faceplate already.

Lazz
Posts: 134
Joined: Sun Jul 29, 2012 11:06 pm
Location: The Warm Arizona Deserts... Phoenix to be precise...

Re: Wanted D1-4 Backing Plate

Post by Lazz » Thu Nov 08, 2018 10:03 am

ooops...
Sorry about that...

Glenn Brooks
Posts: 1762
Joined: Mon Nov 10, 2014 1:39 pm
Location: Woodinville, Washington

Re: Wanted D1-4 Backing Plate

Post by Glenn Brooks » Tue Dec 04, 2018 3:55 pm

Stob, are you still looking for a backing plate? I might have one on an old chuck body. I’ll go measure the diameter and see what it is.

Glenn
Moderator - Grand Scale Forum

Motive power : 1902 A.S.Campbell 4-4-0 American - 12 5/8" gauge, 1955 Ottaway 4-4-0 American 12" gauge

Ahaha, Retirement: the good life - drifting endlessly on a Sea of projects....

Stob
Posts: 7
Joined: Mon Oct 05, 2015 5:46 am

Re: Wanted D1-4 Backing Plate

Post by Stob » Wed Dec 05, 2018 5:26 am

Yes sir I am. Please consider my need to drill holes form the edge to the center, if there is enough meat there to do that, I would be interested! Thanks.

Glenn Brooks
Posts: 1762
Joined: Mon Nov 10, 2014 1:39 pm
Location: Woodinville, Washington

Re: Wanted D1-4 Backing Plate

Post by Glenn Brooks » Wed Dec 05, 2018 7:45 pm

Stob, ok, I’ll go dig it out and take a look. 19F today in the shop, so didn’t go out there for very long. Tomorrow will measure and let you know.

Glenn
Moderator - Grand Scale Forum

Motive power : 1902 A.S.Campbell 4-4-0 American - 12 5/8" gauge, 1955 Ottaway 4-4-0 American 12" gauge

Ahaha, Retirement: the good life - drifting endlessly on a Sea of projects....

Stob
Posts: 7
Joined: Mon Oct 05, 2015 5:46 am

Re: Wanted D1-4 Backing Plate

Post by Stob » Thu Dec 06, 2018 7:30 am

Understood!

Glenn Brooks
Posts: 1762
Joined: Mon Nov 10, 2014 1:39 pm
Location: Woodinville, Washington

Re: Wanted D1-4 Backing Plate

Post by Glenn Brooks » Tue Dec 11, 2018 9:54 pm

Stob,

Finally looked at my old chucks and backing plates. No luck. The one I thought would work is actually a D-1-5, with every other stud broken off. Also the chuck itself is one of those “semi-steel “ style things with the mounting holes drilled and tapped right into the body of the body. So no mountable backing plate. Sorry I couldn’t have been of help.

Glenn
Moderator - Grand Scale Forum

Motive power : 1902 A.S.Campbell 4-4-0 American - 12 5/8" gauge, 1955 Ottaway 4-4-0 American 12" gauge

Ahaha, Retirement: the good life - drifting endlessly on a Sea of projects....

Stob
Posts: 7
Joined: Mon Oct 05, 2015 5:46 am

Re: Wanted D1-4 Backing Plate

Post by Stob » Wed Dec 12, 2018 5:18 am

Thanks for looking!

acme thread
Posts: 9
Joined: Sun Jul 31, 2011 11:31 am
Location: Aurora OH.

Re: Wanted D1-4 Backing Plate

Post by acme thread » Sun May 12, 2019 1:28 pm

I may have something you can use,But it's missing one "metric" D-1-4 pin,and it's only 5.5+inches in dia.
If you face off the .165 x 3.738"chuck register,It's still 1.385" thick. Yours for Med. flat rate postage.
Dave [acme thread]

acme thread
Posts: 9
Joined: Sun Jul 31, 2011 11:31 am
Location: Aurora OH.

Re: Wanted D1-4 Backing Plate

Post by acme thread » Mon May 20, 2019 6:19 am

Backplate is spoken for and already shipped; dave [acme thread]

Post Reply