FS 11" Delta/Rockwell Metal Lathe Parts

Buying, selling, trading and for giving away Items of interest to the Home Machinist Community. (Non-Commercial Only) *PLEASE BE SURE TO LIST CONTACT INFORMATION AND LOCATION OF ITEM*

Moderator: Harold_V

kroll
Posts: 60
Joined: Fri Jun 20, 2014 6:10 am

FS 11" Delta/Rockwell Metal Lathe Parts

Post by kroll » Wed Nov 20, 2019 7:45 pm

Guys I have few parts left over from my project so want to just move them on to someone that needs parts to finish their project.As you know that parts for these lathes 25-100 is hard to come by.Let me know what your looking for I will see if I have it

spro
Posts: 7758
Joined: Mon Feb 20, 2006 11:04 pm
Location: mid atlantic

Re: FS 11" Delta/Rockwell Metal Lathe Parts

Post by spro » Sun Nov 24, 2019 12:36 am

Thanks for the opportunity to acquire certain parts. It's like everything is okay until something happens. Then find out later why it happened.

User avatar
neanderman
Posts: 753
Joined: Mon Jan 09, 2012 7:15 pm
Location: Cincinnati, Ohio, USA

Re: FS 11" Delta/Rockwell Metal Lathe Parts

Post by neanderman » Sun Nov 24, 2019 1:51 am

Is that an L-00 headstock?
Ed

Le Blond Dual Drive
US-Burke Millrite MVI
Atlas 618
Files, snips and cold chisels

Proud denizen of the former "Machine Tool Capitol of the World"

spro
Posts: 7758
Joined: Mon Feb 20, 2006 11:04 pm
Location: mid atlantic

Re: FS 11" Delta/Rockwell Metal Lathe Parts

Post by spro » Sun Nov 24, 2019 8:32 pm

Because it is a Delta/Rockwell 25-100, it is earlier. They had three different spindles until they stuck with the L00 taper lock at or before 1980 Rockwell series. The ones we normally see, 25-450 series have the lever speed control.

User avatar
neanderman
Posts: 753
Joined: Mon Jan 09, 2012 7:15 pm
Location: Cincinnati, Ohio, USA

Re: FS 11" Delta/Rockwell Metal Lathe Parts

Post by neanderman » Mon Nov 25, 2019 2:12 am

Thanks, spro.

I'm looking for an L-00, 4-jaw chuck, 8"-15"; so just thought I'd ask.
Ed

Le Blond Dual Drive
US-Burke Millrite MVI
Atlas 618
Files, snips and cold chisels

Proud denizen of the former "Machine Tool Capitol of the World"

spro
Posts: 7758
Joined: Mon Feb 20, 2006 11:04 pm
Location: mid atlantic

Re: FS 11" Delta/Rockwell Metal Lathe Parts

Post by spro » Tue Nov 26, 2019 9:20 pm

It would be better if kroll came back to say what area of parts are available.

User avatar
neanderman
Posts: 753
Joined: Mon Jan 09, 2012 7:15 pm
Location: Cincinnati, Ohio, USA

Re: FS 11" Delta/Rockwell Metal Lathe Parts

Post by neanderman » Wed Nov 27, 2019 2:43 am

spro wrote:
Tue Nov 26, 2019 9:20 pm
It would be better if kroll came back to say what area of parts are available.
Yep...
Ed

Le Blond Dual Drive
US-Burke Millrite MVI
Atlas 618
Files, snips and cold chisels

Proud denizen of the former "Machine Tool Capitol of the World"

kroll
Posts: 60
Joined: Fri Jun 20, 2014 6:10 am

Re: FS 11" Delta/Rockwell Metal Lathe Parts

Post by kroll » Wed Nov 27, 2019 8:25 pm

Sorry guys,been unavailable for while now cause my laptop failed on me.
QCGB-Sold
Tailstock -Sold
Bed-Given away
Cabinet- Keeping
Power feed brass gear in apron is no good
So all other parts is available.Guys ask for what you are looking for and I will take pics and email them to you via forum or email.If I feel that the part I have is wore out I will say so,if its in good condition I will say so.
Guys the apron has been painted and new oil gits press in,I have few new parts such as bushings for the apron and for the worm gear.My plan was to repair sections and sell each section as a whole such as apron,saddle,VS drive which needs delrin bushing.Guys I don't want to go through another lathe,I just want to play which is why I chose to go ahead and part this lathe out.
I will do better job of staying in touch,sorry

spro
Posts: 7758
Joined: Mon Feb 20, 2006 11:04 pm
Location: mid atlantic

Re: FS 11" Delta/Rockwell Metal Lathe Parts

Post by spro » Wed Nov 27, 2019 9:16 pm

Oh you're okay, just wondering. My laptops go down all the time-. Ed and I would like to know if you have the L00 taper spindle and maybe an extra 4 jaw chuck but that's between you guys. I don't see a need yet for anything but one of the carriage clamps is broken. I know why that happened. They had a Dumore MasterMill attachment on it for a while. :)

User avatar
neanderman
Posts: 753
Joined: Mon Jan 09, 2012 7:15 pm
Location: Cincinnati, Ohio, USA

Re: FS 11" Delta/Rockwell Metal Lathe Parts

Post by neanderman » Thu Nov 28, 2019 12:03 am

Yeah, I've been kind of watching 'the Bay' for a 4-jaw, L-00 chuck for a decent price for awhile -- 8" - 12". The lathe is 15", but there's the issue with lifting one that large...
Ed

Le Blond Dual Drive
US-Burke Millrite MVI
Atlas 618
Files, snips and cold chisels

Proud denizen of the former "Machine Tool Capitol of the World"

kroll
Posts: 60
Joined: Fri Jun 20, 2014 6:10 am

Re: FS 11" Delta/Rockwell Metal Lathe Parts

Post by kroll » Thu Nov 28, 2019 8:48 am

Good morning and Happy Thanksgiving,I do have the L00 but no chucks,that was one of the things that I am keeping,and motor.I actually purchase this donor lathe cause I had the gear/pulley for the spindle repaired and was not sure if it would work or not so I jump on the donor lathe which was in pieces.But for the most part,the gear/pulley came out perfect so that is why I have these parts up for sale since I been using my lathe for couple months now feel good about it.Guys let me say this I am not just get rid of a bunch parts I am only selling what parts that I feel are worth using.
Dang Ed that is a big lathe,I know how you feel about ebay.I was watching it all the time when I was in search of parts.Here's pic of my pulley/gear
Attachments
Gear 10.JPG

User avatar
neanderman
Posts: 753
Joined: Mon Jan 09, 2012 7:15 pm
Location: Cincinnati, Ohio, USA

Re: FS 11" Delta/Rockwell Metal Lathe Parts

Post by neanderman » Thu Nov 28, 2019 5:46 pm

Ouch! Glad you could find a donor lathe..

Yeah, I was looking to get something in the 12" range when I found the one I bought. I call her Berths.
Ed

Le Blond Dual Drive
US-Burke Millrite MVI
Atlas 618
Files, snips and cold chisels

Proud denizen of the former "Machine Tool Capitol of the World"

Post Reply