FS D+M6 Machining Center

Buying, selling, trading and for giving away Items of interest to the Home Machinist Community. (Non-Commercial Only) *PLEASE BE SURE TO LIST CONTACT INFORMATION AND LOCATION OF ITEM*

Moderator: Harold_V

Post Reply
rudyeb
Posts: 2
Joined: Sat Mar 27, 2021 7:50 am

FS D+M6 Machining Center

Post by rudyeb » Tue Mar 30, 2021 9:52 am

FS: D+M Machining Center. Runs fine. Machine was upgraded a few years back but might use some additional upgrading to today's standards. Machine is located in Grafton, MA. Asking $1250.
Contact; rudyebiii@gmail.com

IMG_7284X (1).jpg
IMG_7285X (1).jpg
IMG_7287x.jpg
Attachments
IMG_7286X.jpg

User avatar
Adirondack
Posts: 338
Joined: Tue Aug 23, 2011 6:59 pm
Location: southern CT

Re: FS D+M6 Machining Center

Post by Adirondack » Mon Apr 05, 2021 8:50 pm

Is there a Sherline 5400 luring under all that? What controller is it using? PC included?

Thanks

Chris
Adirondack Car & Foundry
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/

A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!

rudyeb
Posts: 2
Joined: Sat Mar 27, 2021 7:50 am

Re: FS D+M6 Machining Center

Post by rudyeb » Wed Apr 07, 2021 11:50 am

It does not come with a pc. To use on current laptop/PC one needs a USB parallel plug. It is running Mach3 software.
Thanks.

Post Reply