Lathe Following Chip Guard

The Photo Album is a place for "Shop Shots" as well as pictures and descriptions of projects that we are working on. Show off your Shops, Machines, and your Projects!

Moderators: Harold_V, WJH

User avatar
ksierens
Posts: 51
Joined: Tue Jan 24, 2012 9:35 am
Location: Clinton Township, MI

Lathe Following Chip Guard

Postby ksierens » Fri Mar 04, 2016 10:52 am

In a effort to cut down on the chips flying everywhere on my lathe, I made a chip guard that is attached to the carriage of my Craftsman 101.21200 (6x18 Mk2) lathe. When I had the carriage off to drill and tap for the ways wipers I previously made, I also drilled and tapped holes on the back of the carriage so I could mount an indicator. I am taking advantage of that to mount the chip guard.

Image

Image

Image

Image

User avatar
SteveM
Posts: 6202
Joined: Mon Jun 27, 2005 6:18 pm
Location: Connecticut

Re: Lathe Following Chip Guard

Postby SteveM » Fri Mar 04, 2016 11:23 am

Very nicely done. Like how you put the stop in.

How did you curve (or where did you get) the plexiglas?

Steve

User avatar
neanderman
Posts: 526
Joined: Mon Jan 09, 2012 7:15 pm
Location: Cincinnati, Ohio, USA

Re: Lathe Following Chip Guard

Postby neanderman » Fri Mar 04, 2016 5:53 pm

Truly nicely done!
Ed

Le Blond Dual Drive
US-Burke Millrite MVI
Atlas 618
Files, snips and cold chisels

Proud denizen of the former "Machine Tool Capitol of the World"

User avatar
Dave_C
Posts: 869
Joined: Mon Apr 21, 2008 10:34 am
Location: Springfield. MO.

Re: Lathe Following Chip Guard

Postby Dave_C » Fri Mar 04, 2016 7:24 pm

Very nice indeed!

Dave C.
I learn something new every day! Problem is I forget two.

User avatar
ksierens
Posts: 51
Joined: Tue Jan 24, 2012 9:35 am
Location: Clinton Township, MI

Re: Lathe Following Chip Guard

Postby ksierens » Sun Mar 06, 2016 7:10 pm

SteveM wrote:How did you curve (or where did you get) the plexiglas?

Steve


Steve, I made a form out of 3 2x10's with about a 8 1/2" diameter. I heated the acrylic up in the oven on a cookie sheet at about 350 degrees until it started to bend, and held it over the form, covered with some tin foil, until it cooled.

Image

User avatar
warmstrong1955
Posts: 2812
Joined: Thu Mar 18, 2010 2:05 pm
Location: Northern Nevada

Re: Lathe Following Chip Guard

Postby warmstrong1955 » Sun Mar 06, 2016 7:32 pm

Great job.
I like the form trick! Very Clever!

Bill
Today's solutions are tomorrow's problems.

User avatar
SteveM
Posts: 6202
Joined: Mon Jun 27, 2005 6:18 pm
Location: Connecticut

Re: Lathe Following Chip Guard

Postby SteveM » Sun Mar 06, 2016 9:40 pm

ksierens wrote:Steve, I made a form out of 3 2x10's with about a 8 1/2" diameter. I heated the acrylic up in the oven on a cookie sheet at about 350 degrees until it started to bend, and held it over the form, covered with some tin foil, until it cooled.


Nice!

You realize that you could make more and sell them to us?

Steve


Return to “The Photo Album”

Who is online

Users browsing this forum: No registered users and 1 guest