Shop pics

Andypullen: Posts: 2166; Joined: Thu May 22, 2003 8:17 am; Location: Bel Air, MD

Quote

Post by Andypullen » Mon Sep 14, 2009 7:45 am

Here are some pics of my shop....

My first lathe. A Clausing 4901 10" x 24". I've had it since 1992.

Attachments

Clausing 10x24, Sheldon 12" shaper, ProtoTrak AGE-2 control cnc on a BP clone, Reed Prentice 14" x 30", Sanford MG 610 surface grinder, Kalamazoo 610 bandsaw, Hardinge HSL speed lathe, Hardinge HC chucker, Kearney and Trecker #2K plain horizontal mill, Haas TL-1 lathe.

Andypullen: Posts: 2166; Joined: Thu May 22, 2003 8:17 am; Location: Bel Air, MD

Quote

Post by Andypullen » Mon Sep 14, 2009 7:46 am

The Sheldon 12" shaper that came out of the Hagerstown prison. Since 1995.

Attachments

Clausing 10x24, Sheldon 12" shaper, ProtoTrak AGE-2 control cnc on a BP clone, Reed Prentice 14" x 30", Sanford MG 610 surface grinder, Kalamazoo 610 bandsaw, Hardinge HSL speed lathe, Hardinge HC chucker, Kearney and Trecker #2K plain horizontal mill, Haas TL-1 lathe.

Andypullen: Posts: 2166; Joined: Thu May 22, 2003 8:17 am; Location: Bel Air, MD

Quote

Post by Andypullen » Mon Sep 14, 2009 7:50 am

Reed Prentice lathe. The newest addition.

Attachments

Clausing 10x24, Sheldon 12" shaper, ProtoTrak AGE-2 control cnc on a BP clone, Reed Prentice 14" x 30", Sanford MG 610 surface grinder, Kalamazoo 610 bandsaw, Hardinge HSL speed lathe, Hardinge HC chucker, Kearney and Trecker #2K plain horizontal mill, Haas TL-1 lathe.