Bits
Moderator: Harold_V
-
- Posts: 1955
- Joined: Wed Mar 15, 2006 11:10 pm
- Location: Farmington, NM
Bits
It was 7F outside this morning, and a high of 28, so I do not feel guilty about a little shop time. One of the multiple ongoing projects is making parts for a B&S tool and cutter grinder. It is missing most of the attachments so I am going through the manual sort of copying pictures of things. The little arms that hold a diamond for wheel truing need three thunb screws - here they are. The actual head dia is 3/4". Made from mystery steel, the knurls turned out nice but there is slight tearing on the flat surfaces.
-
- Posts: 1955
- Joined: Wed Mar 15, 2006 11:10 pm
- Location: Farmington, NM
Re: Bits
They really are normal shiney steel - blame a poor camera operator for the finish color!