Diesel and CO2 engine plans ?

This Forum is dedicated to the Hobbyist I.C. (Internal Combustion) Engine Community.

Moderators: Harold_V, JackF

Post Reply
xtal_01
Posts: 4
Joined: Thu Oct 15, 2020 1:48 pm

Diesel and CO2 engine plans ?

Post by xtal_01 » Thu Oct 15, 2020 10:42 pm

Post #2 ...

I have been looking for plans for a small diesel engine ... say like a Mills .75 or 1.3 (and any copy of) piston ported engines (the Mills 2.4 was a rear rotary port).

Does anyone know where I can find plans? Lots of partial ones out there and even how to articles but no complete set of plans.

Also, I can not find any plans for a C)2 engine. I found web pages on the history ... different companies how have made them .. cut away views but no plans.

Thanks again .... Mike

xtal_01
Posts: 4
Joined: Thu Oct 15, 2020 1:48 pm

Re: Diesel and CO2 engine plans ?

Post by xtal_01 » Fri Oct 16, 2020 4:23 pm

WOW ... Mauro put me onto Adrian's website ... lots and lot of plans for small diesel engines ... and a lot of technical info on building them.

Sill nothing on CO2 engines ....

Mike

stevehuckss396
Posts: 8
Joined: Tue Aug 07, 2012 8:49 pm
Location: Sterling Heights, MI

Re: Diesel and CO2 engine plans ?

Post by stevehuckss396 » Mon Oct 19, 2020 6:17 pm

CO2 engine plans https://www.metrodetroitmetalworkers.com/plans.html
Go to http://www.floridaame.org and look in the non-combustion gallery and there are plans for a single cylinder and a v-twin both by David Kerzel

Post Reply