Hi folks. I'm looking for plans to build an Anzani Y type for my Bleriot replica. Is there anyone with a set squirreled away that they would part with? They were once offered by a chap from England.
Did I mention that I planned on scaling up to full size?
Thanks
ADK
Anzani Y aero engine
- Adirondack
- Posts: 410
- Joined: Tue Aug 23, 2011 6:59 pm
- Location: southern CT
Anzani Y aero engine
Adirondack Car & Foundry
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
Re: Anzani Y aero engine
The magazine "Stricty I. C." , Issues 81, 82, 83, & 84, had the plans to make a 1/4 scale, Anzani, 3 cylinder engine. You use to be able to buy, them, but don't know, if you still can.
- Adirondack
- Posts: 410
- Joined: Tue Aug 23, 2011 6:59 pm
- Location: southern CT
Re: Anzani Y aero engine
Great. Thanks.solek wrote:The magazine "Stricty I. C." , Issues 81, 82, 83, & 84, had the plans to make a 1/4 scale, Anzani, 3 cylinder engine. You use to be able to buy, them, but don't know, if you still can.
Adirondack Car & Foundry
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/
A little locomotive with 4 wheels on the track is a lot more fun
than a 1/2 finished one with 16 wheels on the bench!
Re: Anzani Y aero engine
i have a set