Three Cylinder Fairbanks Morse

This Forum is dedicated to the Hobbyist I.C. (Internal Combustion) Engine Community.

Moderators: Harold_V, JackF

Post Reply
Posts: 2
Joined: Sat Feb 25, 2006 9:40 am

Three Cylinder Fairbanks Morse

Post by geoz74 » Sat Feb 25, 2006 10:01 am

I leave in France excuse me for my bad english ...hop... sorry americain.
I build littles or mediums steam or ic engines ( STUART models for exemple)
i search informations and drawings about the Three
Cylinder Fairbanks Morse engine. I want to contact Pacific Model Design but the company have ceased activities ( No web site and phone).
Do you know if someone sell the drawings (and castings) for this engine?
Thank you for your answer.

User avatar
Posts: 307
Joined: Sat Jan 04, 2003 12:24 pm
Location: SE Washington State, near Moscow, Idaho

Post by Orrin » Sat Feb 25, 2006 11:01 am

There is a set of these castings on eBay right now. The auction closes on February 26. ... 6037677499

Good luck!

So many projects, so little time.


Post by Guest » Mon Feb 27, 2006 1:51 pm

I try to put a bid on the castings but i can't because i live out of USA and the seller cancel the bid.
If someone know information of the author of this model. I can contact him. May be he'll can sell me the drawings?
thank you

User avatar
Posts: 373
Joined: Sat Jan 04, 2003 1:05 pm

Post by Mike_Henry » Thu Mar 02, 2006 9:04 am

I'm pretty sure that PMD is still in business, assuming that they are the ones that also sell a Mogul casting kit. A friend of mine is nearly done with the Mogul and mentioned talking to the owner recently.

I can probably dig up contact details for PMD from my friend if you'd like.
Mike, near Chicago

Posts: 2
Joined: Sat Feb 25, 2006 9:40 am

Post by geoz74 » Thu Mar 02, 2006 1:06 pm

If you can give me informations about PMD, i'm interested.
Thank you very much

Post Reply