Casting Kit

This Forum is dedicated to the Hobbyist I.C. (Internal Combustion) Engine Community.

Moderators: Harold_V, JackF

Post Reply
solek
Posts: 58
Joined: Wed Apr 16, 2003 6:19 pm

Casting Kit

Post by solek » Thu Mar 02, 2006 12:58 pm

I bought a Breisch/Peters casting kit, but have a problem, the drawings were not with the castings. It is a small kit, as body is only 7" long, and about 4" high. As they are no longer in business, does anyone have a set of drawings for this kit, that I could buy/borrow?
Attachments
bp.jpg
bp.jpg (22.5 KiB) Viewed 3041 times

User avatar
Steamin
Posts: 227
Joined: Wed Jan 22, 2003 9:56 pm
Location: St. Louis, MO, USA
Contact:

Post by Steamin » Fri Mar 03, 2006 2:44 pm

Solek,
Which casting kit do you have? Associated, Lil' Brother, Hired Man??

solek
Posts: 58
Joined: Wed Apr 16, 2003 6:19 pm

Casting Kit

Post by solek » Fri Mar 03, 2006 5:31 pm

To date I have found out two things about the kit: 1. The kit's name is New Holland, which they quit making about 10 years ago. 2. They make the kit in two sizes, this is the smaller, with 4 inch flywheels.

Post Reply