30" 3-in-1 Metalworking Machine Base

This forum is dedicated to those hobbyists with the 3-in-1 metalworking machines. Mill-Drill-Lathes. Tips, techniques, modification and use of these machines is topical.

Moderator: Harold_V

Post Reply
daves1459
Posts: 279
Joined: Mon Jun 07, 2010 7:58 pm
Location: Plainfield, Illinois

30" 3-in-1 Metalworking Machine Base

Post by daves1459 »

Can anyone direct me to a supplier of good quality stands or bases, preferably with casters, for a 30" 3-in-1 sheet metalworking machine?

Thanks, Dave
User avatar
NP317
Posts: 4551
Joined: Tue Jun 24, 2014 2:57 pm
Location: Northern Oregon, USA

Re: 30" 3-in-1 Metalworking Machine Base

Post by NP317 »

I got one of these for my shop:
https://www.uline.com/Product/Detail/H- ... lsrc=aw.ds

Here's another supplier of similar heavy duty tables:
https://store.interstateproducts.com/ma ... rkbenches/

It supports my 36" wide 3-in-1 metal machine nicely, and easily rolls around as needed.
Not cheap (> $550) but a perfect long-term solution for my shop.
RussN
Sheet Metal Machine sml.jpg
daves1459
Posts: 279
Joined: Mon Jun 07, 2010 7:58 pm
Location: Plainfield, Illinois

Re: 30" 3-in-1 Metalworking Machine Base

Post by daves1459 »

NP317 wrote: Sun Dec 01, 2019 10:37 pm I got one of these for my shop:
https://www.uline.com/Product/Detail/H- ... lsrc=aw.ds

Here's another supplier of similar heavy duty tables:
https://store.interstateproducts.com/ma ... rkbenches/

It supports my 36" wide 3-in-1 metal machine nicely, and easily rolls around as needed.
Not cheap (> $550) but a perfect long-term solution for my shop.
RussN
Sheet Metal Machine sml.jpg
Thanks for the tip. I found tables like those you suggested at McMaster-Carr.

Dave
Post Reply