replacing lathe bearings on 9729

This forum is dedicated to those hobbyists with the 3-in-1 metalworking machines. Mill-Drill-Lathes. Tips, techniques, modification and use of these machines is topical.

Moderator: Harold_V

John R
Posts: 37
Joined: Mon Oct 26, 2015 8:43 am
Location: Sour Lake, Texas

Re: replacing lathe bearings on 9729

Post by John R »

No hole in top of main case and driving the main shaft out of the bearings and gear A.
Attachments
mill post.JPG
driving bearings off.JPG
John R
Posts: 37
Joined: Mon Oct 26, 2015 8:43 am
Location: Sour Lake, Texas

Re: replacing lathe bearings on 9729

Post by John R »

Whip sawing main shaft with 320 crocus cloth and the new bearings now go on without press.
Attachments
whipsaw.JPG
main shaft and bearings.JPG
Post Reply