VFD to 2 motors

This forum is dedicated to those hobbyists with the 3-in-1 metalworking machines. Mill-Drill-Lathes. Tips, techniques, modification and use of these machines is topical.

Moderator: Harold_V

SteveM
Posts: 7763
Joined: Mon Jun 27, 2005 6:18 pm
Location: Wisconsin

Re: VFD to 2 motors

Post by SteveM »

If the original poster isn't interested in the VFD, I would be.

Steve
toddalin wrote: Mon Jan 04, 2021 2:11 pm I got a TECO JNEV-101-H1 brand new when I got my machine. But it doesn't have the capacity for my machine and has been on the shelf ever since. Is this something you could use? (1HP/750 Watt)

Just like this one:
https://dealerselectric.com/JNEV-101-H1.asp
Image
VelocityDuck
Posts: 118
Joined: Mon Dec 07, 2020 6:14 am
Location: Panama City, FL

Re: VFD to 2 motors

Post by VelocityDuck »

Thanks Steve. I appreciate the offer. But I have no idea if it will work. The spec sheet shows some differences. They may be relevant, they may not. I just don't know. :(
toddalin
Posts: 284
Joined: Tue Nov 13, 2012 1:10 pm
Location: Orange County, CA
Contact:

Re: VFD to 2 motors

Post by toddalin »

SteveM wrote: Mon Jan 04, 2021 2:33 pm If the original poster isn't interested in the VFD, I would be.

Steve
toddalin wrote: Mon Jan 04, 2021 2:11 pm I got a TECO JNEV-101-H1 brand new when I got my machine. But it doesn't have the capacity for my machine and has been on the shelf ever since. Is this something you could use? (1HP/750 Watt)

Just like this one:
https://dealerselectric.com/JNEV-101-H1.asp
Image
Will keep you in mind.
toddalin
Posts: 284
Joined: Tue Nov 13, 2012 1:10 pm
Location: Orange County, CA
Contact:

Re: VFD to 2 motors

Post by toddalin »

SteveM wrote: Mon Jan 04, 2021 2:33 pm If the original poster isn't interested in the VFD, I would be.

Steve
Piece was spoken for and shipped.
Post Reply