GRIZ MOD G9729 SET UP QUESTION

This forum is dedicated to those hobbyists with the 3-in-1 metalworking machines. Mill-Drill-Lathes. Tips, techniques, modification and use of these machines is topical.

Moderator: Harold_V

Post Reply
HiramAbiff
Posts: 16
Joined: Fri Dec 12, 2008 12:30 am
Location: Pine, CO

Reverse Cut Mod

Post by HiramAbiff »

Thanks for the response--and yes, I agree completely with regard to powering down! I am just trying not to re-invent the wheel with regard to this particular mod. :D
Seems like I saw somebody design what you suggest for the 9725 and similar--but of course, now that I am ready, the page is nowhere to be found. In the end, if I can not find it or come up with a design I like myself, I'll just do what you did & call it quits.

Again, best of luck with your new project & thanks for the response.

Hiram
Top
Post Reply

Return to “3-in-1 Metalworking Machines”