New member

This forum is dedicated to those hobbyists with the 3-in-1 metalworking machines. Mill-Drill-Lathes. Tips, techniques, modification and use of these machines is topical.

Moderator: Harold_V

Post Reply
John Lucas
Posts: 1
Joined: Fri Oct 09, 2009 3:37 pm
Location: Tennessee

New member

Post by John Lucas » Tue Nov 03, 2009 3:25 pm

Last year I purchased a Smithy 1220. I've been having a ball but still learning to tune it up. I am a long time woodworker specializing in Woodturning. I purchased the Smithy to both build parts and adaptors for the wood machines and to learn more about working with metal. I'm also learning blacksmithing and tool making while I'm at it.
Based on what I've turned so far I have a long way to go before making truely precision parts. Hopefully with the help of some of you I will get there eventually.

Harold_V
Posts: 17147
Joined: Fri Dec 20, 2002 11:02 pm
Location: Onalaska, WA USA

Post by Harold_V » Tue Nov 03, 2009 3:38 pm

Hey, John!

Welcome to the board. Lots of talented people here that will gladly share their experiences.

Harold

Post Reply