A lot of Emco stuff is on FleaBay (Nov. 19)

This forum is dedicated to those hobbyists with the 3-in-1 metalworking machines. Mill-Drill-Lathes. Tips, techniques, modification and use of these machines is topical.

Moderator: Harold_V

Post Reply
PeteH
Posts: 1065
Joined: Mon Jun 11, 2007 10:49 pm
Location: Northern New Jersey, USA

A lot of Emco stuff is on FleaBay (Nov. 19)

Post by PeteH » Thu Nov 19, 2009 9:55 am

Just noticed there are several complete machines, various parts and accessories, including a power-feed for an FB2 mill.

None of this is mine. (My grandkids will have to fight over my V10.)

Harold - if this is in the wrong forum, please let me know.
Pete in NJ

Harold_V
Posts: 17144
Joined: Fri Dec 20, 2002 11:02 pm
Location: Onalaska, WA USA

Post by Harold_V » Thu Nov 19, 2009 4:44 pm

We have no forum for advertising the 3-1 machines, so you did just fine, Pete. Very thoughtful of you to provide the information for these guys..

Harold

Jose Rivera
Posts: 3803
Joined: Wed Feb 21, 2007 9:21 pm
Location: Vallejo California

Post by Jose Rivera » Sat Nov 21, 2009 8:04 pm

I just did a search on eBay as I do every day.

There was a lot of equipment listed, now is none!!
As of Nov. 21 at 5:00 PM

Very strange !


Woops!

I must have caught them on a maintenance moment.
I could not a thing with "Lathes" or Milling Machines" either but now is back to normal.

7:00 PM
There are no problems, only solutions.
--------------
Retired journeyman machinist and 3D CAD mechanical designer - hobbyist - grandpa

PeteH
Posts: 1065
Joined: Mon Jun 11, 2007 10:49 pm
Location: Northern New Jersey, USA

Post by PeteH » Sun Nov 22, 2009 10:32 am

The auctions may have ended, Jose. I think they mostly were from one person. BTW, I searched on "emco".
Pete in NJ

Jose Rivera
Posts: 3803
Joined: Wed Feb 21, 2007 9:21 pm
Location: Vallejo California

Post by Jose Rivera » Sun Nov 22, 2009 1:56 pm

All the Emco and Maximat stuff is back today.
Go figure !!
There are no problems, only solutions.
--------------
Retired journeyman machinist and 3D CAD mechanical designer - hobbyist - grandpa

Post Reply