Taper distortion Smithy Midas 1220XL

This forum is dedicated to those hobbyists with the 3-in-1 metalworking machines. Mill-Drill-Lathes. Tips, techniques, modification and use of these machines is topical.

Moderator: Harold_V

Post Reply
Jerry323
Posts: 5
Joined: Fri Nov 04, 2011 6:52 pm

Re: Taper distortion Smithy Midas 1220XL

Post by Jerry323 »

Pete:

I'll give it a look! Thanks!
Top
Post Reply

Return to “3-in-1 Metalworking Machines”