Wanted Brake shoes

For the Buying/Selling/Trading of items of interest to those of us in the Live Steam Hobby.

Moderators: Harold_V, WJH, gwrdriver

Post Reply
jeffsmith
Posts: 74
Joined: Fri Jul 06, 2012 11:33 pm
Location: Mead, Colorado
Contact:

Wanted Brake shoes

Post by jeffsmith » Mon Dec 02, 2019 5:42 pm

Wanted; prototype looking brake shoes and heads for freight car service in 1.5" scale. I want to mount them on a 1/4"x 3/8" brake beam channel.
They will need to be a left and right hand parts. Thank you.

Rwilliams
Posts: 925
Joined: Thu Dec 22, 2005 2:45 pm
Location: Central California

Re: Wanted Brake shoes

Post by Rwilliams » Tue Dec 03, 2019 10:19 am

At one time Barry Hauge of Superscale was experimenting with 1.5 scale brake heads and brake shoe castings. It was one of many experimental projects he worked on that for whatever reason never did reach his catalog offerings. I was able to purchase a set of the experimental castings from him. Not sure what I did with them as the project they were to be attached to was sold before the trucks were ever completed. I may have to dig around and see if I can find them, a true work of art as was all of the work from Superscale.

Dave Bortz
Posts: 103
Joined: Sat Mar 11, 2006 9:44 am
Location: North of Reading PA

Re: Wanted Brake shoes

Post by Dave Bortz » Tue Dec 03, 2019 5:34 pm

Hi;
Some brake parts are coming along from Superscale. I will pm you to discuss.
Thanks
Dave Bortz

Howard Gorin
Posts: 276
Joined: Tue Jan 07, 2003 2:56 am
Location: Waltham, MA

Re: Wanted Brake shoes

Post by Howard Gorin » Wed Dec 04, 2019 3:23 am

I make separate castings for a 33" scale brake shoe, brake shoe head, brake shoe key and a brake beam spreader.
The brake beam is made from a piece of 1/4" square stock and some 5/#2 wire and the spreader.
The brake shoe head go on the ends of the 1/4" square stock.
The 5/32" rod stiffens the bar, like the prototype.
Brake levers and attachments are to your plan
At this time my website is down. I could send you samples of the parts.
Regards, Howard Gorin

User avatar
dnevil
Posts: 283
Joined: Fri Aug 03, 2012 10:19 am
Location: Springtown, Texas
Contact:

Re: Wanted Brake shoes

Post by dnevil » Wed Dec 04, 2019 11:00 am

Brake shoes are consumables, so I thought, why not print them in PLA (plastic)? This may seem like an abomination to some, but in an age of plastic ties and plastic couplers, why not plastic brake shoes? I installed a set on a caboose last spring, and so far they are working well. Take a look.

http://ibls.org/mediawiki/index.php?tit ... rake_Shoes

Regards,
Daris
Daris Nevil
IBLS Secretary
North American Region
http://www.ibls.org

User avatar
makinsmoke
Posts: 1866
Joined: Thu Jul 10, 2003 12:56 pm
Location: Texas Hill Country

Re: Wanted Brake shoes

Post by makinsmoke » Thu Dec 05, 2019 7:48 am

Howard’s brake castings are beautiful. I wish he had everything he sells displayed on his website.

Railroad Supply also sells freight car brake parts or did. Need to check their current catalog.

User avatar
JBodenmann
Posts: 2943
Joined: Sun Oct 26, 2003 1:37 pm
Location: Tehachapi, California

Re: Wanted Brake shoes

Post by JBodenmann » Sat Dec 07, 2019 8:20 pm

Hello My Friends
I have two different 1-1/2" scale brake shoes. The one on the left is a one piece brake shoe. The other is a three piece show with separate head, shoe and key. The single piece shoes are $12.00 each and the three piece shoe is $25.00 each. They are for 33" wheels, investment cast brass.
Jack
Attachments
Brake Shoes.jpg

User avatar
NP317
Posts: 2025
Joined: Tue Jun 24, 2014 2:57 pm
Location: Northern Oregon

Re: Wanted Brake shoes

Post by NP317 » Sun Dec 08, 2019 11:18 am

Nice!
Do the shoes have the ~2 degree taper cast into their contact surface?
RussN

User avatar
ChipsAhoy
Posts: 153
Joined: Wed Feb 18, 2015 12:23 pm
Location: Arizona

Re: Wanted Brake shoes

Post by ChipsAhoy » Sun Dec 08, 2019 12:01 pm

]If this will help... I am in a group where we cast up several parts, amoung them are these brake rings. We make them with 9 shoes per ring, makes it easy to place in a three jaw and gives a spare in case of porosity, loss etc. As you can see we make them thick so that there is plenty to take off and they can be further milled to accomodate a wide range of diameters.
If this is what you like send a PM and we will sell them for $45.00 per ring.
IMG_0336.JPG
IMG_0339.JPG
IMG_0337.JPG
IMG_0338.JPG
Scotty

Post Reply