Okadee Cylinder Drains in stock

[Erie2936]

I have (2) sets of my Okadee style cylinder drains in stock that were ordered but were never picked up. I have banjo fittings with 1/8-27, 1/16-27 and 1/4-40 MTP threads. The drain valves are steam operated via a steam signal line from your cab turret. The steam signal line connection on the drain is 1/8 MTP. Steam closes the drain valve.

Operation of valves can be seen here:

https://www.youtube.com/watch?v=CT-JTWHuScc



The drain body measures ø1/2" x 1.5" long. When mounted to the banjo fitting, the drain extends 7/8" down from the locomotive cylinder block.

One set of drains is $330 post paid.

Additional sets are $320 each.

If a thread size is not specified, 1/8 NPT will be supplied.

PM me if interested.

[Erie2936]

All of the drains are now sold. If anyone did not get a set during this run, PM me and I will add you to the new list. I plan to make another run in December.
Thanks,
Brian Keim

[Erie2936]

I have another (2) sets of my Okadee Cylinder drains in stock. I ran a few sets earlier this year and these are the last sets I produced as extras. Each set consists of (4) valve bodies and (4) 1/8-27 NPT banjo fittings. $320 for set, post paid in the continental US.
PM me if interested.

[Bob Chamberlain]

Goodmorning Brian I am interested in a set of your cylender cock valves would you call me at 619-971-4375 to work out the money deal thanks so much

[Erie2936]

My current stock of cylinder drains is now sold. Thank you to everyone who messaged me. If anyone else wants a set of drains, please let me know. I will make another run of them if there is enough interest.
Regards,
Brian

[GeorgeT]

Hi Brian,

I'm interested in a set of cylinder drain cocks, put my name on the list for your next build.

I look forward to installing them.

Best Regards,

George Treneer

[Erie2936]

Thanks George, I have you on the list.

I have enough requests now where it makes sense to make another run of cylinder drains. I will order castings at the same time I order the Nathan lubricator distributors in two weeks. If there are any last minute requests, please let me know before 1/21.

[rrnut-2]

Put my name on the list for a set.

Jim B