I recently needed some miniature decorative valves so I set out to model them and have them cast. They are non-functional, but have an open center so they will pass air, oil, water, or steam. I produced two sizes, one to accept ø1/8” tubing and the other to accept ø3/32 tubing. They can also be used with solid rod if the application does not require movement of a fluid. Cast from bronze, they can be soft soldered or silver soldered.
The ø1/8 tube Globe and Angle valves are $13 each plus shipping
The ø3/32 tube Globe and Angle valves are $8 each plus shipping.
PM me if interested
Sub Miniature Globe and Angle valves by Keim Steam Pump
Moderators: gwrdriver, Harold_V
- Chris Hollands
- Posts: 546
- Joined: Thu Mar 26, 2009 8:38 am
- Location: Vancouver ,Canada
Re: Sub Miniature Globe and Angle valves by Keim Steam Pump
I'll take some off you Brian , let me work out numbers .
Chris
Chris
- Chris Hollands
- Posts: 546
- Joined: Thu Mar 26, 2009 8:38 am
- Location: Vancouver ,Canada
- Trainman4602
- Posts: 3482
- Joined: Sat Oct 16, 2004 9:26 pm
- Location: New Jersey
Re: Sub Miniature Globe and Angle valves by Keim Steam Pump
This is good news the hobby need this size badly. I see you at Cabin Fever on Saturday be sure and find me. Thanks Dave
ALLWAYS OPERATING MY TRAIN IN A SAFE MANNER USING AUTOMATIC AIR BRAKES