King Metallic Sanders by Keim Steam Pump

For the Buying/Selling/Trading of items of interest to those of us in the Live Steam Hobby.

Moderators: Harold_V, WJH, gwrdriver

Post Reply
Erie2936
Posts: 50
Joined: Sat Dec 15, 2012 8:27 pm
Location: Wooster, Ohio

King Metallic Sanders by Keim Steam Pump

Post by Erie2936 » Wed Feb 08, 2017 10:04 pm

Hello fellow modelers! Those of you who know me and have purchased my products over years will not be surprised by the next gadget I have developed. I now have a working scale sander patterned from the King Metallic Packing Co body. This project has taken me over a year and a half to develop. The hard part was getting the air line in from the side as shown and per prototype installation, to agitate the sand and cause it to rain down the delivery pipe. There is a remarkably tiny core inside the body that makes all this possible, a challenging puzzle on several fronts. Anyway, I developed this sander since it is what I needed for my Erie 4-6-2. I hope that others will find it to be intriguing as well even if one chooses not to use working sanders on their locomotive.
I have found that regular bleached sand works the best. Glass beads clog up inside the delivery pipes. Crushed walnut shells are too coarse. Regular sand works every time. The delivery pipes should be the .030” wall stuff, not the heavy .060” wall stuff one may use for a pressurized water line.
The inlet and discharge are tapped for ¼-40 MTP. The air signal line is 1/8-56 MTP. The bodies are cast bronze and measure 1 5/16” across x 1 1/8” tall. On sale now for $70 each or $280 for a set of (4) postpaid in the continental US. PM me if interested.

I have a YouTube video showing one in operation;

https://www.youtube.com/watch?v=L3rQd1d ... e=youtu.be

Attachments
IMAG3250chaski.jpg
IMAG3249.jpg
IMAG3241.jpg
100_0951.JPG
Brian Keim

User avatar
Loco112
Posts: 947
Joined: Fri Jan 19, 2007 11:09 pm
Location: Dallas ,Texas. USA

Re: King Metallic Sanders by Keim Steam Pump

Post by Loco112 » Wed Feb 08, 2017 11:25 pm

Really nice part, great detail.
Narrow Gauge (Information) Exchange dot Org forum
My Projects:
Davenport 30 ton diesel (SV#101 / D&RGW#50)
C&S 1908 steel & 1905 wood: box, stock, flat, gon
D&RGW wooden freight cars, long & short cabeese
EBT 2-bay hoppers, Conoco #44 tank
DV (K&J) hopper
8"n3 - 3-footers, 8" scale, 24" gauge

765nkp
Posts: 667
Joined: Sun May 06, 2007 9:24 pm
Location: st louis, mo

Re: King Metallic Sanders by Keim Steam Pump

Post by 765nkp » Sat Jul 01, 2017 7:13 pm

I just got my set of sanders from Brian today in the mail, they look awesome. I can't wait to install them.
Tim

david griner
Posts: 135
Joined: Thu Jul 10, 2008 6:39 pm
Location: peoria,az
Contact:

Re: King Metallic Sanders by Keim Steam Pump

Post by david griner » Sun Jul 02, 2017 12:22 pm

Extraordinary work, Sir !!

Post Reply