TAKING ORDERS FOR HANCOCK CHECK VALVES
Moderators: gwrdriver, Harold_V
- Trainman4602
- Posts: 3482
- Joined: Sat Oct 16, 2004 9:26 pm
- Location: New Jersey
TAKING ORDERS FOR HANCOCK CHECK VALVES
I finally got around to making up the check valve prototypes. They will be available in a few weeks. You can get them in either flanged or spanner nut styles. I will have a limited number of elbows available at an extra cost.
The valves feature a top shut off that can be utilized to clean the check valve while under steam if needed.
All the seats and gaskets are “O” rings and the hardware is stainless steel.
You can get the boiler flange fitting in a 1/8 male NTP pipe or a 1/4 NTP male boiler fitting, included with the valve.
The supply fitting is for 5/16 OD tubing solder connection.
Prices as follows
Flange fitting $225.00 each
Spanner fitting $225.00 each
90 degree Elbow $ 50.00 each
Shipping in the USA free foreign orders shipping will be extra.
PM me to get on the list
PS as this is a new product I only have about 30 body castings I will have more soon.
The valves feature a top shut off that can be utilized to clean the check valve while under steam if needed.
All the seats and gaskets are “O” rings and the hardware is stainless steel.
You can get the boiler flange fitting in a 1/8 male NTP pipe or a 1/4 NTP male boiler fitting, included with the valve.
The supply fitting is for 5/16 OD tubing solder connection.
Prices as follows
Flange fitting $225.00 each
Spanner fitting $225.00 each
90 degree Elbow $ 50.00 each
Shipping in the USA free foreign orders shipping will be extra.
PM me to get on the list
PS as this is a new product I only have about 30 body castings I will have more soon.
ALLWAYS OPERATING MY TRAIN IN A SAFE MANNER USING AUTOMATIC AIR BRAKES
-
- Posts: 1595
- Joined: Sun Jan 05, 2003 8:47 am
- Location: Florida, on the Lake Wales Ridge
Re: TAKING ORDERS FOR HANCOCK CHECK VALVES
Great work Dave.
Tim
Tim
He who dies with the most unfinished projects: Should of put more time into their hobby.
Re: TAKING ORDERS FOR HANCOCK CHECK VALVES
Dave,
Do you know if they will function in a horizontal position?
Jerry
Do you know if they will function in a horizontal position?
Jerry
www.chaski.com
- Trainman4602
- Posts: 3482
- Joined: Sat Oct 16, 2004 9:26 pm
- Location: New Jersey
Re: TAKING ORDERS FOR HANCOCK CHECK VALVES
Yes
ALLWAYS OPERATING MY TRAIN IN A SAFE MANNER USING AUTOMATIC AIR BRAKES
Re: TAKING ORDERS FOR HANCOCK CHECK VALVES
Dave, Put me down for two (2) each Flange fitting check valves at $225.00 each and one (1) 90 degree flange Elbow $ 50.00 each.
Total $500.
Jerry
Total $500.
Jerry
www.chaski.com
Re: TAKING ORDERS FOR HANCOCK CHECK VALVES
DAVE,
Look at your PMs. You have one from me for check valves !! Plus the previous post.
Jerry
Look at your PMs. You have one from me for check valves !! Plus the previous post.
Jerry
www.chaski.com
- Trainman4602
- Posts: 3482
- Joined: Sat Oct 16, 2004 9:26 pm
- Location: New Jersey
Re: TAKING ORDERS FOR HANCOCK CHECK VALVES
Yes Jerry I have you on the list. working on them now.
ALLWAYS OPERATING MY TRAIN IN A SAFE MANNER USING AUTOMATIC AIR BRAKES
Re: TAKING ORDERS FOR HANCOCK CHECK VALVES
Ill take 2 at PLS fall meet - if they they can hook up to my existing arrangement (Hudson)
- Trainman4602
- Posts: 3482
- Joined: Sat Oct 16, 2004 9:26 pm
- Location: New Jersey
Re: TAKING ORDERS FOR HANCOCK CHECK VALVES
I don't think they will be ready by then. Doe you want spanner nuts or flange fittings?
ALLWAYS OPERATING MY TRAIN IN A SAFE MANNER USING AUTOMATIC AIR BRAKES
- Trainman4602
- Posts: 3482
- Joined: Sat Oct 16, 2004 9:26 pm
- Location: New Jersey
Re: TAKING ORDERS FOR HANCOCK CHECK VALVES
To Jerry_H
Hi I sent you a PM
Hi I sent you a PM
ALLWAYS OPERATING MY TRAIN IN A SAFE MANNER USING AUTOMATIC AIR BRAKES
Re: TAKING ORDERS FOR HANCOCK CHECK VALVES
You will have to forgive lae reply as my telephone cable is out under a paved road and it will take who knows how long to replace it.
Jerry
Jerry
www.chaski.com