New laser cut tender tank kits from Allen Models!
Posted: Wed Oct 31, 2018 11:39 pm
Allen models is pleased to announce the latest major addition to the Allen Models lineup - complete laser cut steel tender tank kits for most of the Allen engines!
There are two tenders - a 30" tender and a 36" tender. The 30" tender is intended for the Mogul, American, Harpur 2-4-0, 0-4-0 Yard Engine and the Fitchburg Northern. The 36" tender is intended for the Ten Wheeler and the Consolidation. Except for the length they are identical in detail, so they can be mixed and matched with any engine suitably. Each tender features an 8" coal bunker and radius-ed corners throughout.
These products represent hundreds of hours of savings for the builder, with accurate holes from our laser cutter, as well as a bottom trough with CNC bent sides - No match drilling required on the flat areas! Spend more time on the enjoyable parts of your locomotive and less time cutting and filing sheet metal!
The two kits include clecos and a cleco clamping tool and all the copper rivets you'll need (1,000 for the long tender, and 950 for the short tender) plus brass angle brackets that act as a shelf for the removable tank top.
The tender kits are very competitively priced at $650.00 and $700.00, respectively. Shipping not included. Kits are now in stock and ready for delivery.
The 30" tender is available at: https://allenmodels.com/laser-cut-parts ... r-kit.html
The 36" tender is available at: https://allenmodels.com/laser-cut-parts ... r-kit.html
Here are some pictures of the 30" tender.
There are two tenders - a 30" tender and a 36" tender. The 30" tender is intended for the Mogul, American, Harpur 2-4-0, 0-4-0 Yard Engine and the Fitchburg Northern. The 36" tender is intended for the Ten Wheeler and the Consolidation. Except for the length they are identical in detail, so they can be mixed and matched with any engine suitably. Each tender features an 8" coal bunker and radius-ed corners throughout.
These products represent hundreds of hours of savings for the builder, with accurate holes from our laser cutter, as well as a bottom trough with CNC bent sides - No match drilling required on the flat areas! Spend more time on the enjoyable parts of your locomotive and less time cutting and filing sheet metal!
The two kits include clecos and a cleco clamping tool and all the copper rivets you'll need (1,000 for the long tender, and 950 for the short tender) plus brass angle brackets that act as a shelf for the removable tank top.
The tender kits are very competitively priced at $650.00 and $700.00, respectively. Shipping not included. Kits are now in stock and ready for delivery.
The 30" tender is available at: https://allenmodels.com/laser-cut-parts ... r-kit.html
The 36" tender is available at: https://allenmodels.com/laser-cut-parts ... r-kit.html
Here are some pictures of the 30" tender.