Page 1 of 1

3-3/4" Scale Sunbeam Headlamp

Posted: Wed Mar 13, 2019 10:57 pm
by JBodenmann
Hello My Friends
Here is the new 3-3/4" scale Sunbeam headlamp. It features a 5" diameter nickel plated copper reflector. 5" diameter steel tube main body. 15 brass investment castings. Photo engraved builders plate. One electrical circuit for the number boards and another for the main bulb. Assembled and painted for $1150.00. Limited number available.
Jack

Re: 3-3/4" Scale Sunbeam Headlamp

Posted: Thu Mar 14, 2019 7:59 pm
by NP317
!!!!!!!!!!!!!!
~RN

Re: 3-3/4" Scale Sunbeam Headlamp

Posted: Sun Mar 24, 2019 11:33 pm
by JTolan
Do you make one in 2.5?

Re: 3-3/4" Scale Sunbeam Headlamp

Posted: Tue Mar 26, 2019 11:44 am
by JBodenmann
Hello My Friends
The Sunbeam Headlamp is only available in 1-1/2" and 3-3/4" scale. If there isn't a 2-1/2" scale version available I would consider making one. But I wouldn't want to produce something that is already available. I wouldn't have made a 1-1/2" headlamp if I knew David Sclavi was going to re introduce his.
Jack

Re: 3-3/4" Scale Sunbeam Headlamp

Posted: Tue Mar 26, 2019 11:46 am
by Soot n' Cinders
The only 2.5” scale headlight I know of is the one Tom Artzberger sells, but I don’t know how readily available it is.

Re: 3-3/4" Scale Sunbeam Headlamp

Posted: Thu Jul 04, 2019 11:24 pm
by Steve DeLoach
I am interested in at least a couple of these. Please message me when you can.

Steve


Sent from my iPhone using Tapatalk