Page 1 of 1
Dummy Duplex Pump 1 1/2" scale
Posted: Fri Jun 21, 2019 12:34 pm
by optigman
Up for sale is a nicely detailed duplex pump. Aprox size is about 7" X 4". 3D printed with all detail. Great looking pump for your steam locomotive if you are not looking for a working pump. 4 mounting tabs on the backside for easy mounting. Pictures are of the pump for sale. $ 75.00 plus $12.00 postage
Re: Dummy Duplex Pump 1 1/2" scale
Posted: Fri Jun 21, 2019 12:44 pm
by 765nkp
Hi Bob, I will take the pump.
Pm me with how you want me to pay
Thanks
Re: Dummy Duplex Pump 1 1/2" scale
Posted: Fri Jun 21, 2019 4:29 pm
by optigman
765nkp PM sent.
Re: Dummy Duplex Pump 1 1/2" scale
Posted: Mon Jun 24, 2019 12:12 am
by gregudolph
If you make any more I’ll take one, as well.
Re: Dummy Duplex Pump 1 1/2" scale
Posted: Mon Jun 24, 2019 8:45 am
by optigman
Sorry, I did not make the pump. It was a dummy that I replaced with a working pump.
Re: Dummy Duplex Pump 1 1/2" scale
Posted: Wed Jun 26, 2019 1:33 am
by gregudolph
Do you know or have contact info for whomever made it?
Re: Dummy Duplex Pump 1 1/2" scale
Posted: Wed Jun 26, 2019 6:38 am
by JohnHudak
I just did a quick Shapeways search and found a few of them..
Search for Westinghouse CC 1.5 Scale and you'll see it as well. The sellers name is Locomotive Gold
Good luck
Re: Dummy Duplex Pump 1 1/2" scale
Posted: Thu Jun 27, 2019 12:17 am
by optigman
Sorry I have no information on the 3D printed pump that I sold on this form. It was on an engine I acquired and I replaced it with a working pump. I had it sitting around for a year and had no need for it. Wish I could be the bearer of better news regarding the origins of the dummy pump!