Hello everyone, I'm looking for a set of drawings in one inch scale for a NYC hudson locomotive. Any help is appreciated.
Thank you,
Joe
NYC hudson prints
Moderators: gwrdriver, Harold_V
-
- Posts: 955
- Joined: Sun May 06, 2007 10:14 pm
- Location: St. Louis, MO
Re: NYC hudson prints
I, too, would be interested.
- Bill Shields
- Posts: 10459
- Joined: Fri Dec 21, 2007 4:57 am
- Location: 39.367, -75.765
- Contact:
Re: NYC hudson prints
If you can do basic math...drawings for 3/4" Hudsons are available from Friends models.
If you cannot do that level of basic math then perhaps a NYC Hudson should not be your choice of loco to build.
If you cannot do that level of basic math then perhaps a NYC Hudson should not be your choice of loco to build.
Too many things going on to bother listing them.
Re: NYC hudson prints
Actually it is basic math but maybe it would be much less work than scaling hundreds of parts if there are a set of drawings already done.
- Bill Shields
- Posts: 10459
- Joined: Fri Dec 21, 2007 4:57 am
- Location: 39.367, -75.765
- Contact:
Re: NYC hudson prints
Very true...but if you cannot find a 1" drawing set the Langworthy is a good place to start.
Too many things going on to bother listing them.
Re: NYC hudson prints
Hi Bill, Did Langworthy have drawings and castings for a one inch scale hudson, what year was that? Does anyone have a set of Langworthy's drawings?
Joe
Joe
Re: NYC hudson prints
Langworthy only did a 3/4” scale version. I don’t know of anybody that put out a commercial set of castings and drawings for a NYC Hudson in 1” scale.
You can buy the 3/4” scale drawings from Friends/Yankee Shop in Massachusetts.
Keith
You can buy the 3/4” scale drawings from Friends/Yankee Shop in Massachusetts.
Keith