With production well under way, I've opened up the 4000C's to pre-orders. This is not required, but is recommended if you're sure you want one for your locomotive!
Unless something goes catastrophically wrong (always a possibility) the 4000's will ship in April.
https://www.eccentricengineer.com/scale ... c-injector
Nathan 4000C's Available for Pre-Order
Moderators: gwrdriver, Harold_V
- AnthonyDuarte
- Posts: 491
- Joined: Tue Jan 19, 2010 10:46 am
- Location: Orange, CA
- Contact:
-
- Posts: 582
- Joined: Tue Jul 31, 2012 1:59 pm
- Location: Germany, Duesseldorf
Re: Nathan 4000C's Available for Pre-Order
Hello Anthony,
Wow, you did it, nothing but my highest respect !
What a pitty to me, my A was built just at 1 in 10 scale (or about 1.2 scale) . But I am to think about ...
Carry on!
Asteamhead
Wow, you did it, nothing but my highest respect !
What a pitty to me, my A was built just at 1 in 10 scale (or about 1.2 scale) . But I am to think about ...
Carry on!
Asteamhead
Re: Nathan 4000C's Available for Pre-Order
I have just the spot for one of the first 4000C's!
Jim Kreider
Jim Kreider
- AnthonyDuarte
- Posts: 491
- Joined: Tue Jan 19, 2010 10:46 am
- Location: Orange, CA
- Contact:
Re: Nathan 4000C's Available for Pre-Order
Asteamhead,
I will have a few extra operating quadrants if you’re interested in putting one on your engine! Would still look nice in a 1:10 scale cab.
Anthony
I will have a few extra operating quadrants if you’re interested in putting one on your engine! Would still look nice in a 1:10 scale cab.
Anthony
-
- Posts: 11
- Joined: Wed Dec 19, 2007 5:26 pm
- Location: Ohio
Re: Nathan 4000C's Available for Pre-Order
When ordering the 4000c is there a place to also order spare parts IE set of cones, connection fittings,etc.?
It's going to be Christmas in April ((or May),I can't wait.
Keep up the great work.
Chessi2700
It's going to be Christmas in April ((or May),I can't wait.
Keep up the great work.
Chessi2700
- AnthonyDuarte
- Posts: 491
- Joined: Tue Jan 19, 2010 10:46 am
- Location: Orange, CA
- Contact:
Re: Nathan 4000C's Available for Pre-Order
Chessi2700,
I typically create a spare parts page after production is finished so I know concretely how many parts I have left over. However, I do make extra for the parts that customers tend to order, so if you'd like to add them to a pre-order there are other ways we can handle that.
PM me if you'd like to do that.
Anthony
I typically create a spare parts page after production is finished so I know concretely how many parts I have left over. However, I do make extra for the parts that customers tend to order, so if you'd like to add them to a pre-order there are other ways we can handle that.
PM me if you'd like to do that.
Anthony
-
- Posts: 582
- Joined: Tue Jul 31, 2012 1:59 pm
- Location: Germany, Duesseldorf
Re: Nathan 4000C's Available for Pre-Order
Hello Anthony,AnthonyDuarte wrote: ↑Thu Mar 04, 2021 3:44 pm Asteamhead,
I will have a few extra operating quadrants if you’re interested in putting one on your engine! Would still look nice in a 1:10 scale cab.
Anthony
Sounds great to me, yes, I'm interested , thanks !
Please tell me your best price to get my pre-order !
Asteamhead