Engine was last run in September and is a good running engine.
Has the following:
- Two axle pumps
- Injector
- Hand pump
- superheater
- two safety valves
- Riding car w/ propane tank (set up for ground running)
- grates for coal firing
- locomotive stand
- bag of spare parts
- drawings/instructions
- dome & stack castings if you'd like to americanize the loco
The previous owner planned on adding universal joints on the steam lines to the cylinders. He began that project on the engineer's side cylinder, but didn't complete it. As a result, the pipe isn't sealed, but if you want to get it running quickly, it can be easily soldered up. Locomotive weights about 150 pounds.
$5,500 O.B.O.
Will entertain any reasonable offer.
I don't have the means to ship the locomotive and stand, but I would be happy to drive up to 4 hours to meet part way or deliver. (Located in Rochester, NY)