Group,
I am seeking a set of readable drawings for Bill VanBrockin's 3/4" scale single "Westinghouse" style water pump. They were available from Power Model Supply, and possibly C.A. Street & Sons prior to that.
If anyone has a set of these drawings from Bill VB, or P.M.S., or C.A. Street....and is willing to sell them or have copies made up (I will pay costs, plus something for your effort!), please contact me. It's Westinghouse Single - water - 3/4" scale, that I seek.
Thank you,
-John
john at friendsmodels dot com
>
>
WTB: 3/4" scale VanBrocklin single cylinder pump dwgs.
Moderators: gwrdriver, Harold_V
-
Marty_Knox
- Posts: 1728
- Joined: Thu Jan 09, 2003 6:50 pm
- Location: Michigan, USA
Re: WTB: 3/4" scale VanBrocklin single cylinder pump dwgs.
John, I know I have some. The question is - Where?
Marty
Marty
-
Bill Shields
- Posts: 10590
- Joined: Fri Dec 21, 2007 4:57 am
- Location: 39.367, -75.765
- Contact:
Re: WTB: 3/4" scale VanBrocklin single cylinder pump dwgs.
Looks like you are already a member of 'the where-in-the-heck-is-it club'.
Too many things going on to bother listing them.
Re: WTB: 3/4" scale VanBrocklin single cylinder pump dwgs.
Can't remember where I put my membership card.Bill Shields wrote:Looks like you are already a member of 'the where-in-the-heck-is-it club'.
Steve
-
Bill Shields
- Posts: 10590
- Joined: Fri Dec 21, 2007 4:57 am
- Location: 39.367, -75.765
- Contact:
Re: WTB: 3/4" scale VanBrocklin single cylinder pump dwgs.
stapled to the corner of the prints, no doubt... 
Too many things going on to bother listing them.
Re: WTB: 3/4" scale VanBrocklin single cylinder pump dwgs.
One must remember.
The best learning experiences come
from working with the older Masters.
Ken.
The best learning experiences come
from working with the older Masters.
Ken.
Re: WTB: 3/4" scale VanBrocklin single cylinder pump dwgs.
Ken....those are 1" scale and larger pumps, John is looking for Bill VanBrocklin's 3/4" scale pump drawings.
Keith
Re: WTB: 3/4" scale VanBrocklin single cylinder pump dwgs.
Thanks Keith,LVRR2095 wrote:Ken....those are 1" scale and larger pumps, John is looking for Bill VanBrocklin's 3/4" scale pump drawings.
Keith
I missunderstood.
Ken.
One must remember.
The best learning experiences come
from working with the older Masters.
Ken.
The best learning experiences come
from working with the older Masters.
Ken.
-
Wayne Davis
- Posts: 114
- Joined: Mon Sep 03, 2007 10:19 pm
- Location: Creston Iowa
Re: WTB: 3/4" scale VanBrocklin single cylinder pump dwgs.
This is an old thread, but I have just started looking for these plans. Are there any available that I could get a copy of or a similar pump in 3/4?
Thanks for any help!
Wayne
Thanks for any help!
Wayne
-
Bill Shields
- Posts: 10590
- Joined: Fri Dec 21, 2007 4:57 am
- Location: 39.367, -75.765
- Contact:
Re: WTB: 3/4" scale VanBrocklin single cylinder pump dwgs.
I have a set in PDF form if you want them.
in reality, it is a VERY FINICKY pump to build & maintain....emphasis on VERY FINICKY.
give me your e-mail address and I will send.
in reality, it is a VERY FINICKY pump to build & maintain....emphasis on VERY FINICKY.
give me your e-mail address and I will send.
Too many things going on to bother listing them.
-
Wayne Davis
- Posts: 114
- Joined: Mon Sep 03, 2007 10:19 pm
- Location: Creston Iowa
Re: WTB: 3/4" scale VanBrocklin single cylinder pump dwgs.
Bill,Bill Shields wrote:I have a set in PDF form if you want them.
in reality, it is a VERY FINICKY pump to build & maintain....emphasis on VERY FINICKY.
give me your e-mail address and I will send.
Is the dual cylinder as finicky?
I ask because i have castings for the dual that i've yet to build. And My machinest skills are weak at best.
Scotty
