This forum is for Internal Combustion Engines such as Hit 'n Miss, Throttle Goverened One Lungers etc. Repair, Machining, Operation, Buy/Sell/Trade of these engines are all topical.
1 post • Page 1 of 1
This is my first post, feel free to let me know if this post is inappropriate. Here's the story: I am seeking information and advice about 2 model engines and drawings that were made several years ago by a distant relative. These models and drawings were acquired in the estate, I am looking for information and also their value should selling them be pursued. My understanding is they were meticulously made over several years by the relative in his retirement. #1 Triple Expansion Engine by O.B Bolton. The Model is about approx 16" tall x 16" wide x 12" deep, included are 10 sheets of blueprints. #2 "Corliss" Stationary Steam Engine, approx 20" long x 12" high x 12" deep included are 5 sheets of blueprints from Coles Power Models, Ventura CA. The models are in excellent condition, light rust on a few parts, everything turns smoothly
- IMG_1.jpg (18.53 KiB) Viewed 2235 times
- IMG_2.jpg (27.33 KiB) Viewed 2235 times
- IMG_3.jpg (58.21 KiB) Viewed 2235 times
- IMG_4.jpg (51.53 KiB) Viewed 2235 times