Witte Model B Restore Project

This forum is for Internal Combustion Engines such as Hit 'n Miss, Throttle Goverened One Lungers etc. Repair, Machining, Operation, Buy/Sell/Trade of these engines are all topical.

Moderator: Harold_V

Post Reply
driggars

Witte Model B Restore Project

Post by driggars »

I picked up an old throttle governed Witte Model B (2HP) It was all in pieces when I bought it, it needs a total clean up and some parts changed out.
The head has brazed places on it but looks like a good job was done. I have also picked up another head that has been braze repaired but a person can't really tell.

I need to know where to get a parts manual or any kind of manual so I can figure out where all the parts go and what maybe missing.
I also will need a source for some parts for it, some new and some used, anyone know?
Thanks guys, this is my first engine project like this, so I am a newbie to the hobby
Clint
User avatar
GlennW
Posts: 7284
Joined: Sun Apr 15, 2007 9:23 am
Location: Florida

Post by GlennW »

Hello Clint,

You might try here!

http://www.hitnmiss.com/

Sounds like a fun filled project :)
Glenn

Operating machines is perfectly safe......until you forget how dangerous it really is!
NAMPeters
Posts: 50
Joined: Sat Jan 04, 2003 6:25 pm
Location: Phoenix & Arlington, Arizona USA
Contact:

Post by NAMPeters »

Try the SmokStak: http://www.smokstak.com/forum/ a forum of engine and tractor collectors.
Neil (Chief Hinder Scratcher) Peters
Post Reply