Shaper move from Dayton,MN to Asheville,NC

This forum is for those individuals or small business to solicit requests for Service from those members of our group. Machining, Foundry work, Sheet Metal work etc. This site makes no guarranty of work or represenation by the users of this site. It merely attempts to provide a place to allow individuals the opportunity to meet and discuss needs and capabilities.

Moderator: Harold_V

Post Reply
n2xd
Posts: 4
Joined: Sun Feb 25, 2018 11:56 am

Shaper move from Dayton,MN to Asheville,NC

Post by n2xd » Tue Mar 20, 2018 8:20 am

Looking for help in transporting a Whipp 16" shaper from Dayton,MN to the Asheville,NC area. Of course payment would be made for this service. Thanks.

John

User avatar
ALCOSTEAM
Posts: 621
Joined: Tue Feb 04, 2003 9:20 am
Location: illinois

Re: Shaper move from Dayton,MN to Asheville,NC

Post by ALCOSTEAM » Tue Mar 20, 2018 7:01 pm

you might try and post a request on YT.com or yesterdays tractors. The load brokers watch the site quite close for loads. I know of the past year or two the site moderators have been trying to weed out non tractor type loads or at least that is what I have heard.

RONALD
Posts: 526
Joined: Sun Oct 26, 2003 7:27 am

Re: Shaper move from Dayton,MN to Asheville,NC

Post by RONALD » Wed Mar 21, 2018 7:58 am

It has been a few years since I used these guys, but their prices were reasonable:

https://www.freightquote.com/freight-shipping

n2xd
Posts: 4
Joined: Sun Feb 25, 2018 11:56 am

Re: Shaper move from Dayton,MN to Asheville,NC

Post by n2xd » Thu Mar 22, 2018 8:19 am

Thanks for the replies. I called freightquote yesterday and they were very reasonable. I will be using there services. Thanks again.


John

Post Reply