Page 1 of 1
Shaper move from Dayton,MN to Asheville,NC
Posted: Tue Mar 20, 2018 8:20 am
by n2xd
Looking for help in transporting a Whipp 16" shaper from Dayton,MN to the Asheville,NC area. Of course payment would be made for this service. Thanks.
John
Re: Shaper move from Dayton,MN to Asheville,NC
Posted: Tue Mar 20, 2018 7:01 pm
by ALCOSTEAM
you might try and post a request on YT.com or yesterdays tractors. The load brokers watch the site quite close for loads. I know of the past year or two the site moderators have been trying to weed out non tractor type loads or at least that is what I have heard.
Re: Shaper move from Dayton,MN to Asheville,NC
Posted: Wed Mar 21, 2018 7:58 am
by RONALD
It has been a few years since I used these guys, but their prices were reasonable:
https://www.freightquote.com/freight-shipping
Re: Shaper move from Dayton,MN to Asheville,NC
Posted: Thu Mar 22, 2018 8:19 am
by n2xd
Thanks for the replies. I called freightquote yesterday and they were very reasonable. I will be using there services. Thanks again.
John