Wood lathe

This forum is for those individuals or small business to solicit requests for Service from those members of our group. Machining, Foundry work, Sheet Metal work etc. This site makes no guarranty of work or represenation by the users of this site. It merely attempts to provide a place to allow individuals the opportunity to meet and discuss needs and capabilities.

Moderator: Harold_V

Post Reply
hoppercar
Posts: 332
Joined: Sun Jul 22, 2018 4:09 pm

Wood lathe

Post by hoppercar » Fri Jun 12, 2020 10:56 am

Building a new 1 1/2 scale tank.car.......need someone with a wood lathe that can turn up the flanged and dished ends out of any hardwood, so they can be epoxied into.the ends of green pvc pipe....pm. Me your snail mail.address, and I can send you a sketch....dimensions are not fussy....using a cardboard template for the radius on the ends is good enough for me....thanks

User avatar
Adirondack
Posts: 323
Joined: Tue Aug 23, 2011 6:59 pm
Location: southern CT

Re: Wood lathe

Post by Adirondack » Sun Jun 28, 2020 12:51 am

Hey hoppercar, 3D printing would also work. I'm doing the it for my 1 3/4" scale tank car on 3 1/2" gauge using an 8" PVC pipe. If you're interested, we could work something out.

Chris
Adirondack Car & Foundry
Check out our projects: https://www.facebook.com/ADKrail/
Visit our ALL-NEW online store: https://adirondackcarfoundry.square.site/

A little locomotive with 4 wheels on the track is a lot more fun
than a 1/4 finished one with 16 wheels on the bench!

User avatar
NP317
Posts: 2578
Joined: Tue Jun 24, 2014 2:57 pm
Location: Northern Oregon

Re: Wood lathe

Post by NP317 » Sun Jun 28, 2020 9:59 am

One of our Kitsap Live Steamers member made a really nice Vanderbilt tender tank for his 1.5" scale Pacific.
The rear domed end of the tender tank was made from a metal Wok cooking pan!
Yes, it had a flat center section several inches in diameter, but the effect was good and making that tank end was relatively simple.
RussN

Post Reply