Type of Faucet: Jado 822/003/144 Wide spread with Knob handles. ( 5 years old ).
http://www.jadousa.com/designers/techni ... 22/003/144
Above link goes Spec sheets & Installation Instructions.
Part needed: Is what I would call a “stem extension”. That goes from the ceramic valve or cartridge to the knob handle. Jado does not sell this part ( they call it part of the handle that is not suppose to come apart ).
Overall Length of part: 7/8 inch.
One end has a 20 spline female end and the other end is threaded.
Spline end: 9/32 inch ID ( measured off the male part ). Depth of spline: 5/16 inch.
Threaded end: 17/64 inch OD. Length of threads: 19/64 inch. Number of threads: 6.
Material type: Copper.
What might work is to find a part with the 20 spline female end and then cut the threads in on the other end.
Need 4 but depending on cost may purchase 8 for a backup.
Thanks & Take Care!
Rob O'Halloran
5203 N. 24th Street, #204
Phoenix, Az 85016-3545
Ph: 602-224-9567 Tuesday – Wednesday 9:30 am – 3:00pm Arizona time.
Need stem extension for faucet made.
Moderator: Harold_V
Part has been made
Part has been made.
Post can be removed.
Thanks
Rob O'Halloran
Post can be removed.
Thanks
Rob O'Halloran