Needing a few pieces made

This forum is for those individuals or small business to solicit requests for Service from those members of our group. Machining, Foundry work, Sheet Metal work etc. This site makes no guarranty of work or represenation by the users of this site. It merely attempts to provide a place to allow individuals the opportunity to meet and discuss needs and capabilities.

Moderator: Harold_V

Post Reply
Posts: 1
Joined: Fri Mar 19, 2010 3:48 pm
Location: Lexington KY

Needing a few pieces made

Post by PooK » Fri Mar 19, 2010 8:26 pm

Hello guy's,
I am looking to get an idea of cost and time on eight pieces. Just a ball park per would be fine as I know that my drawing is VERY very bad.
I would need four total (two right, two left) of the plates and four flanges.
The radius corners can be what ever is easiest (they are just for looks)
If anyone is interested in doing this I will provide the specs I need as the picture is just a close example (the best I can do)
The step in the plate is just like the flange and when bolted together will hold a bearing.

Posts: 86
Joined: Sun May 11, 2008 12:39 am
Location: Fayetteville,N.C.


Post by machine48 » Fri Mar 19, 2010 8:33 pm

I can give you a quote on the parts you need made. You can email me at
email address:

Thanks Larry

Post Reply