Wanted - Wire EDM work

This forum is for those individuals or small business to solicit requests for Service from those members of our group. Machining, Foundry work, Sheet Metal work etc. This site makes no guarranty of work or represenation by the users of this site. It merely attempts to provide a place to allow individuals the opportunity to meet and discuss needs and capabilities.

Moderator: Harold_V

Post Reply
Steelart99
Posts: 3
Joined: Thu Mar 22, 2012 3:03 pm
Location: Colorado Springs
Contact:

Wanted - Wire EDM work

Post by Steelart99 »

I have a couple of titanium knife components that I'd like to have cut with a wire EDM. I can cut and stack my .045 titanium plate to yield a thickness of about 0.72" to make it easier to cut. Total number of pieces will be 80-100 (depending on nesting, clamping requirements, etc.). The total area to be cut is about 45 sq. in.

If there is anyone who is willing to quote this small job, let me know and I can provide AutoCad drawings.
Thanks

Dan
Handmade Knives by D. Fronefield
"Specializing in Meteorites and other exotic materials"
www.meteorforge.net
Post Reply